WARNING
It is possible to lock/unlock all doors, turn the interior lights on, and activate the panic alarm by using the key fob from outside the vehicle.
Be sure to remove the key from the vehicle before locking the doors.
The key fob can operate at a distance of approximately 33 ft (10 m) from the vehicle. The effective distance depends on the conditions around the vehicle.
As many as four key fobs can be used with one vehicle. For information concerning the purchase and use of additional key fobs, it is recommended that you visit a NISSAN dealer.
The key fob will not function when:
The panic alarm will not activate when the key is in the ignition switch.
CAUTION
Listed below are conditions or occurrences which will damage the key fob:
This could affect the system function.
If a key fob is lost or stolen, NISSAN recommends erasing the ID code of that key fob. This will prevent the key fob from unauthorized use to unlock the vehicle.
For information regarding the erasing procedure, it is recommended that you visit a NISSAN dealer.
How to use remote keyless entry system

Locking doors
1. Close all windows.
2. Remove the key from the ignition switch.
3. Close all doors.
4. Press the  
 button on the 
key fob. All
the doors lock. The hazard warning lights
flash twice and the horn beeps once to
indicate all doors are locked.
  button is 
	pressed with
	all doors locked, the hazard warning lights
	flash twice and the horn beeps once as a
	reminder that the doors are already
	locked.
  button, the doors 
	will lock
	but the horn will not beep and the hazard
	lights will not flash.The horn may or may not beep. For additional information, refer to "Silencing the horn beep feature" in this section.
Unlocking doors

Press the button on the key fob once.
  driver's 
	door unlocks.Press the 
 button on the key fob 
again
within five seconds.
The interior lights can be turned off without waiting a period of time by inserting the key into the ignition switch and placing the ignition switch in the ON or START position, locking the doors with the key fob, power door lock switch or pushing the interior light switch to the off position.
Auto relock
When the 
  button on the key 
fob is
pressed, all doors will lock automatically within
1 minute unless one of the following operations is
performed:
 button.Releasing the trunk lid

Press the 
  button on the 
key fob for longer
than 0.5 seconds to open the trunk lid. The trunk
release button on the key fob will not operate
when the ignition switch is placed in the ON
position.
Using the panic alarm

If you are near your vehicle and feel threatened,
you may activate the panic alarm to call attention
by pressing and holding the 
 button 
on the
key fob for longer than 0.5 seconds.
The panic alarm and headlights will stay on for a period of time.
The panic alarm stops when:
Using the interior light
Press the 
 button on the key fob 
once to
turn on the interior lights.
For additional information, refer to "Interior light" in the "Instruments and controls" section of this manual.
Silencing the horn beep feature

If desired, the horn beep feature can be deactivated using the key fob.
To deactivate: Press and hold the 
and 
 buttons for at least 2 seconds.
The hazard warning lights will flash three times to confirm that the horn beep feature has been deactivated.
To activate: Press and hold the 
 
and 
  buttons for at least 2 
seconds once
more.
The hazard warning lights will flash once and the horn will sound once to confirm that the horn beep feature has been reactivated.
Deactivating the horn beep feature does not silence the horn if the alarm is triggered.
DoorsWhen the doors are locked using one of the following methods, the doors cannot be opened using the inside or outside door handles. The doors must be unlocked to open the doors. WARNING Before ...

WARNING Radio waves could adversely affect electric medical equipment. Those who use a pacemaker should contact the electric medical equipment manufacturer for the possible influences befo ...
Explanation of scheduled maintenance items
   The following descriptions are provided to give
you a better understanding of the scheduled
maintenance items that should be regularly
checked or replaced. The maintenance schedule
indicates at which mileage/time intervals each
item requires service.
In addition to scheduled maintenance, you ...
   
Description
   Engine Cooling System 
M/T models
CVT and A/T models
Engine Cooling System Schematic 
M/T models
CVT and A/T models
OVERHEATING CAUSE ANALYSIS 
Troubleshooting Chart
	
		 
		
		Symptom
		Check items
	
	
		Cooling system
		parts
		malfunction
		Poor heat transfer
 ...