Toyota
Nissan Versa
 Sedan Service Manual
Body exterior, doors, roof & vehicle security » Power window control system (PWC) » Power supply and ground circuit
BCM (Body control system) (with intelligent key system)

BCM (BODY CONTROL SYSTEM) (WITH INTELLIGENT KEY SYSTEM) : Diagnosis Procedure

Regarding Wiring Diagram information, refer to BCS "Wiring Diagram".

1.CHECK FUSES AND FUSIBLE LINK

Check that the following fuses and fusible link are not blown.

Is the fuse blown?

YES >> Replace the blown fuse or fusible link after repairing the affected circuit.

NO >> GO TO 2.

2.CHECK POWER SUPPLY CIRCUIT

1. Disconnect BCM connector M99.

2. Check voltage between BCM connector M99 and ground.

Is the inspection result normal?

YES >> GO TO 3.

NO >> Repair harness or connector.

3.CHECK GROUND CIRCUIT

Check continuity between BCM connector M99 and ground.

Is the inspection result normal?

YES >> Inspection End.

NO >> Repair harness or connector.

    More about «Power supply and ground circuit»:

    BCM (Body control system) (with intelligent key system)

    BCM (Body control system) (without intelligent key system)

    Power window main switch

    Front power window switch (passenger side)

    Rear power window switch

    Nissan Versa Sedan Service Manual / Body exterior, doors, roof & vehicle security / Power window control system (PWC) / Power supply and ground circuit / BCM (Body control system) (with intelligent key system)

    Nissan Versa Sedan Service Manual

    Categories


    © 2017-2024 Copyright www.niveguide.com