Toyota
Nissan Versa
 Sedan Service Manual
Driver controls » Exterior lighting system (EXL) » Power supply and ground circuit
BCM (Body control system) (without intelligent key system)

BCM (BODY CONTROL SYSTEM) (WITHOUT INTELLIGENT KEY SYSTEM) : Diagnosis Procedure

Regarding Wiring Diagram information, refer to BCS "Wiring Diagram".

1.CHECK FUSES AND FUSIBLE LINK

Check that the following fuses and fusible link are not blown.

Is the fuse blown?

YES >> Replace the blown fuse or fusible link after repairing the affected circuit.

NO >> GO TO 2.

2.CHECK POWER SUPPLY CIRCUIT

1. Turn ignition switch OFF.

2. Disconnect BCM connectors.

3. Check voltage between BCM connector and ground.

Is the inspection result normal?

YES >> GO TO 3.

NO >> Repair harness or connector.

3.CHECK GROUND CIRCUIT

Check continuity between BCM connector and ground.

Is the inspection result normal?

YES >> Inspection End.

NO >> Repair harness or connector.

    More about «Power supply and ground circuit»:

    BCM (Body control system) (with intelligent key system)

    BCM (Body control system) (without intelligent key system)

    IPDM E/R (With intelligent key system)

    IPDM E/R (Without intelligent key system)

    Nissan Versa Sedan Service Manual / Driver controls / Exterior lighting system (EXL) / Power supply and ground circuit / BCM (Body control system) (without intelligent key system)

    Nissan Versa Sedan Service Manual

    Categories


    © 2017-2024 Copyright www.niveguide.com