Nissan Versa

 Sedan Service Manual

Driver controls » Exterior lighting system (EXL) » High-mounted stop lamp
Bulb Replacement

WARNING: Do not touch bulb with your hand while it is on or right after being turned off. Burning may result.

CAUTION:

• Do not touch the glass surface of the bulb with bare hands or allow oil or grease to get on it to prevent damage to the bulb.
• Do not leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect the performance of lamp. When replacing bulb, be sure to replace it with new one.

HIGH-MOUNTED STOP LAMP BULB - REAR SPOILER

The high-mounted stop lamp bulb is a LED and is integrated into the high-mounted stop lamp and is serviced as an assembly. Refer to EXL "Removal and Installation".

HIGH-MOUNTED STOP LAMP BULB - PARCEL SHELF

Removal

1. Fully open trunk lid assembly.

2. Rotate the bulb socket counterclockwise and remove.

3. Remove the bulb from the bulb socket.

Installation

Installation is in the reverse order of removal.

Removal and Installation

Bulb Replacement