Toyota
Nissan Versa
 Sedan Service Manual
Electrical & power control » LAN System (LAN)
CAN Communication circuit

Diagnosis Procedure

1.CONNECTOR INSPECTION

1. Turn the ignition switch OFF.

2. Disconnect the battery cable from the negative terminal.

3. Disconnect all the unit connectors on CAN communication system.

4. Check terminals and connectors for damage, bend and loose connection.

Is the inspection result normal?

YES >> GO TO 2.

NO >> Repair the terminal and connector.

2.CHECK HARNESS CONTINUITY (SHORT CIRCUIT)

Check the continuity between the data link connector terminals.

Is the inspection result normal?

YES >> GO TO 3.

NO >> Check the harness and repair the root cause.

3.CHECK HARNESS CONTINUITY (SHORT CIRCUIT)

Check the continuity between the data link connector and the ground.

Is the inspection result normal?

YES >> GO TO 4.

NO >> Check the harness and repair the root cause.

4.CHECK ECM AND BCM TERMINATION CIRCUIT

1. Remove the ECM and the BCM.

2. Check the resistance between the ECM terminals.

3. Check the resistance between the BCM terminals.

Is the measurement value within the specification?

YES >> GO TO 5.

NO >> Replace the ECM and/or the BCM.

5.CHECK SYMPTOM

Connect all the connectors. Check if the symptoms described in the "Symptom (Results from interview with customer)" are reproduced.

Inspection result

Reproduced>>GO TO 6.

Non-reproduced>>Start the diagnosis again. Follow the trouble diagnosis procedure when past error is detected.

6.CHECK UNIT REPRODUCTION

Perform the reproduction test as per the following procedure for each unit.

1. Turn the ignition switch OFF.

2. Disconnect the battery cable from the negative terminal.

3. Disconnect one of the unit connectors of CAN communication system.

NOTE: ECM and BCM have a termination circuit. Check other units first.

4. Connect the battery cable to the negative terminal. Check if the symptoms described in the "Symptom (Results from interview with customer)" are reproduced.

NOTE: Although unit-related error symptoms occur, do not confuse them with other symptoms.

Inspection result

Reproduced>>Connect the connector. Check other units as per the above procedure.

Non-reproduced>>Replace the unit whose connector was disconnected.

CAN SYSTEM (TYPE 2)

DTC/CIRCUIT DIAGNOSIS

    More about «LAN System (LAN)»:

    Precautions

    System

    Trouble diagnosis

    Diagnosis and repair workflow

    Precautions

    CAN Communication system

    Main line between IPDM-E and DLC circuit

    ECM Branch line circuit

    ABS Branch line circuit

    IPDM-E Branch line circuit

    TCM Branch line circuit

    A-BAG Branch line circuit

    AV Branch line circuit

    DLC Branch line circuit

    EPS Branch line circuit

    M&A Branch line circuit

    STRG Branch line circuit

    BCM Branch line circuit

    CAN Communication circuit

    Main line between IPDM-E and DLC circuit

    ECM Branch line circuit

    ABS Branch line circuit

    IPDM-E Branch line circuit

    A-BAG Branch line circuit

    DLC Branch line circuit

    EPS Branch line circuit

    M&A Branch line circuit

    STRG Branch line circuit

    BCM Branch line circuit

    CAN Communication circuit

    Main line between IPDM-E and DLC circuit

    ECM Branch line circuit

    ABS Branch line circuit

    IPDM-E Branch line circuit

    TCM Branch line circuit

    A-BAG Branch line circuit

    DLC Branch line circuit

    EPS Branch line circuit

    M&A Branch line circuit

    STRG Branch line circuit

    BCM Branch line circuit

    CAN Communication circuit

    Main line between IPDM-E and DLC circuit

    ECM Branch line circuit

    ABS Branch line circuit 

    IPDM-E Branch line circuit 

    TCM Branch line circuit 

    A-BAG Branch line circuit

    DLC Branch line circuit 

    EPS Branch line circuit 

    M&A Branch line circuit

    STRG Branch line circuit

    BCM Branch line circuit

    CAN Communication circuit

    Main line between IPDM-E and DLC circuit

    ECM Branch line circuit

    ABS Branch line circuit

    IPDM-E Branch line circuit

    TCM Branch line circuit

    A-BAG Branch line circuit

    AV Branch line circuit

    DLC Branch line circuit

    EPS Branch line circuit

    M&A Branch line circuit

    STRG Branch line circuit

    BCM Branch line circuit

    CAN Communication circuit

    Nissan Versa Sedan Service Manual / Electrical & power control / LAN System (LAN) / CAN Communication circuit

    Nissan Versa Sedan Service Manual

    Categories


    © 2017-2024 Copyright www.niveguide.com