Toyota
Nissan Versa
 Sedan Service Manual
Body exterior, doors, roof & vehicle security » Exterior (EXT)
Cowl top

Exploded View

Exploded View

1. Cowl top cover seal 2. Cowl top cover 3. Air intake cover 4. Cowl cover one-way valve 5. Washer nozzle 6. EPT sealer [3.0 mm (0.118 in)] 7. EPT sealer [3.0 mm (0.118 in)] Clip Pawl Fron

Removal and Installation

REMOVAL

1. Remove front wiper arms (LH/RH). Refer to WW "WIPER ARM : Removal and Installation".

2. Remove front fender covers (LH/RH). Refer to DLK "FENDER COVER : Removal and Installation".

3. Remove cowl top cover clips.

4. Pull forward to release cowl top cover from windshield glass.

CAUTION: When performing the procedure after removing cowl top cover, protect the lower of windshield glass with urethane, etc.

REMOVAL

5. Disconnect the washer tube connector.

6. Remove cowl top cover.

7. Remove the following parts after removing cowl top cover.

  • EPT sealer
  • Cowl top cover seal
  • Washer tube
  • Washer nozzles (LH/RH). Refer to WW "WASHER NOZZLE : Removal and Installation".

INSTALLATION

Installation is in the reverse order of removal.

CAUTION:

  • Always replace cowl top cover EPT sealer on rear of vehicle with a new one when installing old cowl top cover.
  • After installing wiper arms, perform adjustment. Refer to WW-45, "WIPER ARM : Adjustment".
    More about «Exterior (EXT)»:

    Precautions

    Squeak and rattle trouble diagnoses

    Front bumper

    Under cover

    Rear bumper

    Front grille

    Cowl top

    Fender protector

    Roof side molding

    Door outside molding

    Trunk lid finisher

    Door parting seal

    Rear spoiler

    Nissan Versa Sedan Service Manual / Body exterior, doors, roof & vehicle security / Exterior (EXT) / Cowl top

    Nissan Versa Sedan Service Manual

    Categories


    © 2017-2024 Copyright www.niveguide.com