Toyota
Nissan Versa
 Sedan Service Manual
Body exterior, doors, roof & vehicle security » Door & lock (DLK) » Door switch
Diagnosis Procedure

Regarding Wiring Diagram information, refer to DLK "Wiring Diagram".

1.CHECK DOOR SWITCH INPUT SIGNAL

  1. Turn ignition switch OFF.
  2. Check signal between BCM connector and ground with oscilloscope.  

Is the inspection result normal?

YES >> GO TO 4

NO >> GO TO 2

2.CHECK DOOR SWITCH CIRCUIT

  1. Disconnect BCM connector.
  2. Check continuity between BCM connector and door switch connector. 
  3. Check continuity between BCM connector and ground.

Is the inspection result normal?

YES >> GO TO 3

NO >> Repair or replace harness between BCM and door switch.

3.CHECK DOOR SWITCH

Refer to DLK "Component Inspection".

Is the inspection result normal?

YES >> GO TO 4

NO >> Replace malfunctioning door switch.

4.CHECK INTERMITTENT INCIDENT

Refer to GI "Intermittent Incident".

>> Inspection End.

Component Inspection

1.CHECK DOOR SWITCH

  1. Turn ignition switch OFF.
  2. Disconnect door switch connector.
  3. Check door switch.                                                               

Is the inspection result normal?

YES >> Inspection End.

NO >> Replace malfunctioning door switch.

    More about «Door switch»:

    Component Function Check

    Diagnosis Procedure

    Nissan Versa Sedan Service Manual / Body exterior, doors, roof & vehicle security / Door & lock (DLK) / Door switch / Diagnosis Procedure

    Nissan Versa Sedan Service Manual

    Categories


    © 2017-2024 Copyright www.niveguide.com