Nissan Versa

 Sedan Service Manual

Body exterior, doors, roof & vehicle security » Security control system (SEC) » P1610 Lock mode
Diagnosis Procedure

1.CHECK ENGINE START FUNCTION

1. Check that DTC except for DTC P1610 is not detected.

   If detected, erase the DTC after fixing.

2. Turn ignition switch OFF.
3. Depress brake pedal and contact the registered Intelligent Key backside to push-button ignition switch, then wait 5 seconds.
4. Turn ignition switch ON.
5. Turn ignition switch OFF and wait 5 seconds.
6. Repeat steps 3 and 5 twice (a total of 3 times).
7. Check that engine can start.

>> Inspection End.

DTC Logic

Diagnosis Procedure