Toyota
Nissan Versa
 Sedan Service Manual
Body exterior, doors, roof & vehicle security » Security control system (SEC) » B210F Shift position/clutch interlock switch
Diagnosis Procedure

Regarding Wiring Diagram information, refer to SEC "Wiring Diagram".

1.CHECK DTC OF BCM

Check DTC in Self Diagnostic Result mode of BCM using CONSULT.

Is DTC detected?

YES >> Perform the trouble diagnosis related to the detected DTC. Refer to BCS "DTC Index".

NO >> GO TO 2.

2.CHECK IPDM E/R SIGNAL CIRCUIT OPEN AND SHORT

1. Turn ignition switch OFF.

2. Disconnect IPDM E/R connector.

3. Disconnect transmission range switch connector.

4. Check continuity between IPDM E/R harness connector and transmission range switch harness connector.

5. Check continuity between IPDM E/R harness connector and ground.

Is the inspection result normal?

YES >> Replace IPDM E/R. Refer to PCS "Removal and Installation".

NO >> Repair or replace harness.

    More about «B210F Shift position/clutch interlock switch»:

    DTC Logic

    Diagnosis Procedure

    Nissan Versa Sedan Service Manual / Body exterior, doors, roof & vehicle security / Security control system (SEC) / B210F Shift position/clutch interlock switch / Diagnosis Procedure

    Nissan Versa Sedan Service Manual

    Categories


    © 2017-2024 Copyright www.niveguide.com