Toyota
Nissan Versa
 Sedan Service Manual
Body exterior, doors, roof & vehicle security » Security control system (SEC) » B2196 Dongle unit
Diagnosis Procedure

Regarding Wiring Diagram information, refer to SEC "Wiring Diagram".

1.PERFORM INITIALIZATION

1. Perform initialization of BCM and registration of all mechanical keys using CONSULT.

For initialization and registration procedures, refer to CONSULT Immobilizer mode and follow the onscreen instructions.

2. Start the engine.

Dose the engine start?

YES >> Inspection End.

NO >> GO TO 2.

2.CHECK DONGLE UNIT CIRCUIT

1. Turn ignition switch OFF.

2. Disconnect BCM connector and dongle unit connector.

3. Check continuity between BCM harness connector and dongle unit harness connector. 

4. Check continuity between BCM harness connector and ground.

Is the inspection result normal?

YES >> GO TO 3.

NO >> Repair or replace harness.

3.CHECK DONGLE UNIT GROUND CIRCUIT

Check continuity between dongle unit harness connector and ground.

Is the inspection result normal?

YES >> Replace dongle unit.

NO >> Repair or replace harness.

    More about «B2196 Dongle unit»:

    DTC Logic

    Diagnosis Procedure

    Nissan Versa Sedan Service Manual / Body exterior, doors, roof & vehicle security / Security control system (SEC) / B2196 Dongle unit / Diagnosis Procedure

    Nissan Versa Sedan Service Manual

    Categories


    © 2017-2024 Copyright www.niveguide.com