Toyota
Nissan Versa
 Sedan Service Manual
Electrical & power control » Power control system (PCS) » B2614 ACC Relay circuit
Diagnosis Procedure

Regarding Wiring Diagram information, refer to PCS "Wiring Diagram".

1.CHECK ACCESSORY RELAY CONTROL SIGNAL

Check voltage between BCM harness connector and ground.           

Is the inspection result normal?

YES >> Replace BCM. Refer to BCS "Removal and Installation".

NO >> GO TO 2.

2.CHECK ACCESSORY RELAY CONTROL SIGNAL CIRCUIT

1. Turn ignition switch OFF.

2. Disconnect BCM connector and accessory relay.

3. Check continuity between BCM harness connector and accessory relay harness connector.

4. Check continuity between BCM harness connector and ground.

Is the inspection result normal?

YES >> GO TO 3.

NO >> Repair or replace harness.

3.CHECK ACCESSORY RELAY

Refer to PCS "Component Inspection".

Is the inspection result normal?

YES >> Replace BCM. Refer to BCS "Removal and Installation".

NO >> Replace accessory relay.

    More about «B2614 ACC Relay circuit»:

    DTC Logic

    Diagnosis Procedure

    Component Inspection

    Nissan Versa Sedan Service Manual / Electrical & power control / Power control system (PCS) / B2614 ACC Relay circuit / Diagnosis Procedure

    Nissan Versa Sedan Service Manual

    Categories


    © 2017-2024 Copyright www.niveguide.com