COMMON ITEM
COMMON ITEM : CONSULT Function (BCM - COMMON ITEM)
APPLICATION ITEM
CONSULT performs the following functions via CAN communication with BCM.
SYSTEM APPLICATION
BCM can perform the following functions.
DOOR LOCK
DOOR LOCK : CONSULT Function (BCM - DOOR LOCK)
DATA MONITOR
ACTIVE TEST
WORK SUPPORT
* : Initial setting
MULTI REMOTE ENT
MULTI REMOTE ENT : CONSULT Function (BCM - MULTI REMOTE ENT)
DATA MONITOR
ACTIVE TEST
WORK SUPPORT
TRUNK
TRUNK : CONSULT Function (BCM - TRUNK)
DATA MONITOR
ECU DIAGNOSIS INFORMATION
BCM, IPDM E/R
List of ECU Reference
ECU | Reference |
BCM | BCS "Reference Value" |
BCS "Wiring Diagram" | |
BCS "Fail-safe" | |
BCS "DTC Inspection Priority Chart" | |
BCS "DTC Index" | |
IPDM E/R | PCS "Reference Value" |
PCS "Wiring Diagram" | |
PCS"Fail-Safe" | |
PCS "DTC Index" |
WIRING DIAGRAM
POWER DOOR LOCK SYSTEM
Wiring Diagram
REMOTE KEYLESS ENTRY SYSTEM
Wiring Diagram
TRUNK LID OPENER SYSTEM
Wiring Diagram
BASIC INSPECTION
TRUNK LID OPENER SYSTEM : System Diagram TRUNK LID OPENER SYSTEM : System Description TRUNK LID OPEN OPERATION When the trunk release button of the keyfob is pressed, the trunk release si ...
Work Flow OVERALL SEQUENCE DETAILED FLOW 1.GET INFORMATION FOR SYMPTOM Get the detailed information from the customer about the symptom (the condition and the environment when the incident/ ...
Continuously Variable Transmission (CVT) fluid (if so equipped)
CAUTION
NISSAN recommends using Genuine
NISSAN CVT Fluid NS-3 (or equivalent)
ONLY in NISSAN CVTs. Do not mix with
other fluids.
Do not use Automatic transmission
fluid (ATF) or Manual transmission fluid
in a NISSAN CVT, as it may damage the
CVT. Damage caused by the use of fluids
...
Drive belt
1. Water pump pulley
2. Generator pulley
3. Manual tensioner pulley
4. Air conditioner compressor pulley
5. Crankshaft pulley
WARNING
Be sure the ignition switch is placed in the
OFF or LOCK position before servicing
drive belt. The engine could rotate
unexpectedly.
1. Visually inspect t ...