Toyota
Nissan Versa
 Sedan Service Manual
Suspension » Rear suspension (RSU) » Rear shock absorber
Disposal

  1. Set shock absorber horizontally to the ground with the piston rod fully extracted.
  2. Drill 2 - 3 mm (0.08 - 0.12 in) hole at the position ( ) from top as shown to release gas gradually.

CAUTION:

  • Wear eye protection (safety glass).
  • Wear gloves.
  • Be careful with metal chips or oil blown out by the compressed gas.

NOTE:

  • Drill vertically in this direction.
  • Directly to the outer tube avoiding brackets.
  • The gas is clear, colorless, odorless, and harmless.

(A) : 20 - 30 mm (0.79 - 1.18 in)

Disposal

    3.   Position the drilled hole downward and drain oil by moving the piston rod several times.

CAUTION: Dispose of drained oil according to the law and local regulations.

    More about «Rear shock absorber»:

    Removal and Installation

    Inspection

    Disposal

    Nissan Versa Sedan Service Manual / Suspension / Rear suspension (RSU) / Rear shock absorber / Disposal

    Nissan Versa Sedan Service Manual

    Categories


    © 2017-2024 Copyright www.niveguide.com