Toyota
Nissan Versa
 Sedan Service Manual
Engine » Engine control system (EC) » P0460 fuel level sensor
DTC Logic

DTC DETECTION LOGIC

NOTE:

  • If DTC P0460 is displayed with DTC UXXXX, first perform the trouble diagnosis for DTC UXXXX.
  • If DTC P0460 is displayed with DTC P0607, first perform the trouble diagnosis for DTC P0607. Refer to EC, "DTC Logic".

When the vehicle is parked, naturally the fuel level in the fuel tank is stable. It means that output signal of the fuel level sensor does not change. If ECM senses sloshing signal from the sensor, fuel level sensor malfunction is detected.

DTC No. Trouble diagnosis name DTC detecting condition Possible cause
P0460 FUEL LEV SEN SLOSH (Fuel level sensor circuit noise) Even though the vehicle is parked, a signal being varied is sent from the fuel level sensor to ECM.
  • Harness or connectors (The CAN communication line is open or shorted)
  • Harness or connectors (The sensor circuit is open or shorted)
  • Combination meter
  • Fuel level sensor

DTC CONFIRMATION PROCEDURE

1.PRECONDITIONING

If DTC Confirmation Procedure has been previously conducted, always perform the following procedure before conducting the next test.

  1. Turn ignition switch OFF and wait at least 10 seconds.
  2. Turn ignition switch ON.
  3. Turn ignition switch OFF and wait at least 10 seconds.

>> GO TO 2.

2.PERFORM DTC CONFIRMATION PROCEDURE

  1. Start engine and wait maximum of 2 consecutive minutes.
  2. Check 1st trip DTC.

Is 1st trip DTC detected?

YES >> Proceed to EC, "Diagnosis Procedure".

NO >> INSPECTION END

    More about «P0460 fuel level sensor»:

    DTC Logic

    Diagnosis Procedure

    Nissan Versa Sedan Service Manual / Engine / Engine control system (EC) / P0460 fuel level sensor / DTC Logic

    Nissan Versa Sedan Service Manual

    Categories


    © 2017-2024 Copyright www.niveguide.com