Toyota
Nissan Versa
 sedan Owners Manual
Monitor, climate, audio, phone and voice recognition systems » Bluetooth Hands-Free Phone System without Navigation System (Type A) (if so equipped)
Getting started

The following procedures will help you get started using the Bluetooth Hands-Free Phone System with NISSAN Voice Recognition. For additional information, refer to "List of voice commands" in this section.

Choosing a language

You can interact with the Bluetooth Hands- Free Phone System using English, Spanish or French.

To change the language, perform the following.

1. Press and hold the button for more than 5 seconds.

2. The system announces: "Press the PHONE/SEND (   ) button for the hands-free phone system to enter the voice adaptation mode or press the PHONE/END (  ) button to select a different language." 3. Press the button  .

For information on voice adaptation, refer to "Voice adaptation (VA) mode"in this section.

4. The system announces the current language and gives you the option to change the language to Spanish (in Spanish) or French (in French). To select the current language, press the PHONE/SEND ( ) button. To select a different language, tilt the tuning switch ( ) left or right.

NOTE:

You must press the button within 5 seconds to change the language.

5. If you decide not to change the language, do not press either button. After 5 seconds, the Voice Recognition session will end, and the language will not be changed.

Connecting procedure

NOTE:

The connecting procedure must be performed when the vehicle is stationary. If the vehicle starts moving during the procedure, the procedure will be canceled.

1. Press the   button on the steering wheel. The system announces the available commands.

2. Say: "Connect phone" A . The system acknowledges the command and announces the next set of available commands.

3. Say: "Add phone" B . The system acknowledges the command and asks you to initiate connecting from the phone handset C .

The connecting procedure of the cellular phone varies according to each cellular phone model. For additional information, refer to the cellular phone Owner's Manual.

You can also visit www.nissanusa.com/bluetooth for instructions on connecting NISSAN recommended cellular phones.

When prompted for a pin code, enter "1234" from the handset. The pin code "1234" has been assigned by NISSAN and cannot be changed.

4. The system asks you to say a name for the phone D .

If the name is too long or too short, the system tells you, then prompts you for a name again.

Also, if more than one phone is connected and the name sounds too much like a name already used, the system tells you, then prompts you for a name again.

Making a call by entering a phone number

1. Press the button on the steering wheel. A tone will sound.

2. Say: "Call" A . The system acknowledges the command and announces the next set of available commands.

3. Say "Phone Number" B . The system acknowledges the command and announces the next set of available commands.

Say: "Special Number" to dial more than 10 digits or any special characters.

4. Say the number you wish to call starting with the area code in single digit format C . If the system has trouble recognizing the correct phone number, try entering the number in the following groups: 3-digit area code, 3-digit prefix and the last 4-digits. For example, 555-121-3354 can be said as "five five five" as the 1st group, then "one two one" as the 2nd group, and "three three five four" as the 3rd group. For dialing more than 10 digits or any special characters, say "Special Number". For additional information refer to "How to say numbers" in this section.

5. When you have finished speaking the phone number, the system repeats it back and announces the available commands.

6. Say: "Dial" D . The system acknowledges the command and makes the call.

For additional command options, refer to "List of voice commands" in this section.

Receiving a call

When you hear the ring tone, press the button on the steering wheel.

Once the call has ended, press the button on the steering wheel.

NOTE:

If you do not wish to take the call when you hear the ring tone, press the  button on the steering wheel.

For additional command options, refer to "List of voice commands" in this section.

    More about «Bluetooth Hands-Free Phone System without Navigation System (Type A) (if so equipped)»:

    Regulatory Information

    Using the system

    Control buttons

    Getting started

    List of voice commands

    Voice Adaptation (VA) mode

    Manual control

    Troubleshooting guide

    Nissan Versa sedan Owners Manual / Monitor, climate, audio, phone and voice recognition systems / Bluetooth Hands-Free Phone System without Navigation System (Type A) (if so equipped) / Getting started

    Nissan Versa sedan Owners Manual

    Categories


    © 2017-2024 Copyright www.niveguide.com