Toyota
Nissan Versa
 sedan Owners Manual
Technical and consumer information
Installing front license plate

Installing front license plate

Use the following steps to mount the front license plate: Before mounting the license plate, confirm that the following parts are enclosed in the plastic bag:

  • License plate bracket
  • License plate bracket screws x 2
  • Screw grommets x 2

1. Hold the license plate bracket 1 and make a shallow hole in the bumper fascia using a 0.39 in (10 mm) drill. To avoid damaging the area behind the fascia, apply only light pressure to the drill.

2. Insert the grommets 2 into the holes in the bumper fascia.

3. Insert a small flat-bladed screwdriver into the grommet hole to turn the threaded part of the grommet 90.

4. Mount the license plate bracket using the two longer screws 3 .

    More about «Technical and consumer information»:

    Recommended fluids/lubricants and capacities

    Specifications

    When traveling or registering in another country

    Vehicle identification

    Installing front license plate

    Vehicle loading information

    Towing a trailer

    Uniform tire quality grading

    Emission control system warranty

    Reporting safety defects

    Readiness for inspection/maintenance (I/M) test

    Event Data Recorders (EDR)

    Owner's Manual/Service Manual order information

    Nissan Versa sedan Owners Manual / Technical and consumer information / Installing front license plate

    Nissan Versa sedan Owners Manual

    Categories


    © 2017-2024 Copyright www.niveguide.com