Nissan Versa (N17): Intelligent key

Nissan Versa 2nd generation (N17) Service Manual / Body exterior, doors, roof & vehicle security / Door & lock (DLK) / Intelligent key

Component Function Check

NOTE: The Signal Tech II Tool (J-50190) can be used to perform the following functions. Refer to the Signal Tech II User Guide for additional information.

Check Intelligent Key relative signal strength.
Confirm vehicle Intelligent Key antenna signal strength.

1.CHECK FUNCTION

Select "INTELLIGENT KEY" of "BCM" using CONSULT.
Select "RKE OPE COUN1" in "DATA MONITOR" mode.
Check that the function operates normally according to the following conditions.

Is the inspection result normal? YES >> Intelligent Key is OK.

NO >> Refer to DLK-93, "Diagnosis Procedure".

Diagnosis Procedure

NOTE: The Signal Tech II Tool (J-50190) can be used to perform the following functions. Refer to the Signal Tech II User Guide for additional information.

Check Intelligent Key relative signal strength.
Confirm vehicle Intelligent Key antenna signal strength.

1.CHECK INTELLIGENT KEY BATTERY

Check by connecting a resistance (approximately 300Ω) so that the current value becomes about 10 mA. Refer to DLK "Removal and Installation".

Standard : Approx. 2.5 - 3.0V

Is the measurement value within the specification?

YES >> Replace Intelligent Key.

NO >> Replace Intelligent Key battery.

CHECK INTELLIGENT KEY BATTERY

Hazard function

Component Function Check 1.CHECK FUNCTION Select INTELLIGENT KEY of BCM using CONSULT. Select FLASHER in ACTIVE TEST mode. Touch LH or RH to check that it works normally. Is the inspecti ...

Key warning lamp

Component Function Check 1.CHECK FUNCTION Select INTELLIGENT KEY of BCM using CONSULT. Select INDICATOR in ACTIVE TEST mode. Touch KEY IND or KEY ON to check that it works normally. Is the ...

Other materials:

P0963 Pressure control solenoid A
DTC Logic DTC DETECTION LOGIC DTC Trouble diagnosis name DTC detection condition Possible causes P0963 Pressure Control Solenoid "A" Control Circuit High The following diagnosis conditions are met, and the current monitor reading of the TCM line pressure ...