The interior light has a three-position switch and operates regardless of ignition switch position.
When the switch is in the ON position 1 , the interior lights illuminate, regardless of door position.
The lights will go off after a period of time unless the ignition switch is placed in the ACC or ON position.
When the switch is in the DOOR position 2 , the interior lights will stay on for a period of time when:
The lights will turn off while the timer is activated when:
When the switch is in the OFF position 3 , the interior lights do not illuminate, regardless of door position.
The lights will turn off automatically after a period of time while doors are open to prevent the battery from becoming discharged.
CAUTION
Do not use for extended periods of time with the engine stopped. This could result in a discharged battery.
Map light (if so equipped)
The map light has a three-position switch and operates regardless of ignition switch position.
When the switch is in the ON position 3 , the map light illuminates, regardless of door position.
The light will go off after a period of time unless the ignition switch is placed in the ACC or ON position.
When the switch is in the DOOR position 2 , the map light will stay on for a period of time when:
The light will turn off while the timer is activated when:
When the switch is in the OFF position 1 , the map light does not illuminate, regardless of door position.
The light will turn off automatically after a period of time while doors are open to prevent the battery from becoming discharged.
CAUTION
Do not use for extended periods of time with the engine stopped. This could result in a discharged battery.
Trunk light
The light illuminates when the trunk lid is opened.
When the trunk lid is closed, the light goes off.
For additional information, refer to "Exterior and interior lights" in the "Do-it-yourself" section of this manual.
Power windows (if so equipped) WARNING Make sure that all passengers have their hands, etc. inside the vehicle while it is in motion and before closing the windows. Use the window lock swi ...
Type A (if so equipped) 1. Master key 2. Valet key 3. Key number plate A key number plate is supplied with your keys. Record the key number and keep it in a safe place (such as your wallet ...
Drive belt
1. Water pump pulley
2. Generator pulley
3. Manual tensioner pulley
4. Air conditioner compressor pulley
5. Crankshaft pulley
WARNING
Be sure the ignition switch is placed in the
OFF or LOCK position before servicing
drive belt. The engine could rotate
unexpectedly.
1. Visually inspect t ...
Additional service when replacing
TCM
Description
Always perform the following items when the TCM is replaced.
LOADING OF THE CALIBRATION DATA
The TCM acquires calibration data (individual characteristic value) of
each solenoid that is stored in the
ROM assembly (in the control valve). This enables the TCM to perform
accur ...