Toyota
Nissan Versa
 Sedan Service Manual
Driver controls » Exterior lighting system (EXL) » Power supply and ground circuit
IPDM E/R (With intelligent key system)

IPDM E/R (WITH INTELLIGENT KEY SYSTEM) : Diagnosis Procedure

Regarding Wiring Diagram information, refer to PCS "Wiring Diagram".

1. CHECK FUSE AND FUSIBLE LINKS

Check that the following IPDM E/R fuse or fusible links are not blown.

Is the fuse blown?

YES >> Replace the blown fuse or fusible link after repairing the affected circuit.

NO >> GO TO 2

2. CHECK BATTERY POWER SUPPLY CIRCUIT

1. Turn ignition switch OFF.

2. Disconnect IPDM E/R.

3. Check voltage between IPDM E/R connectors and ground.

Is the measurement value normal?

YES >> GO TO 3

NO >> Repair or replace harness.

3. CHECK GROUND CIRCUIT

1. Turn ignition switch OFF.

2. Check continuity between IPDM E/R connectors and ground.

Does continuity exist?

YES >> Inspection End.

NO >> Repair or replace harness.

    More about «Power supply and ground circuit»:

    BCM (Body control system) (with intelligent key system)

    BCM (Body control system) (without intelligent key system)

    IPDM E/R (With intelligent key system)

    IPDM E/R (Without intelligent key system)

    Nissan Versa Sedan Service Manual / Driver controls / Exterior lighting system (EXL) / Power supply and ground circuit / IPDM E/R (With intelligent key system)

    Nissan Versa Sedan Service Manual

    Categories


    © 2017-2024 Copyright www.niveguide.com