Toyota
Nissan Versa
 Sedan Service Manual
Electrical & power control » Body control system (BCS)
Power supply and ground circuit

Diagnosis Procedure

Regarding Wiring Diagram information, refer to BCS "Wiring Diagram".

1.CHECK FUSES AND FUSIBLE LINK

Is the fuse blown?

YES >> Replace the blown fuse or fusible link after repairing the affected circuit.

NO >> GO TO 2.

2.CHECK POWER SUPPLY CIRCUIT

1. Disconnect BCM connector M99.

2. Check voltage between BCM connector M99 and ground.   

Is the inspection result normal?

YES >> GO TO 3.

NO >> Repair harness or connector.

3.CHECK GROUND CIRCUIT

Check continuity between BCM connector M99 and ground.

Is the inspection result normal?

YES >> Inspection End.

NO >> Repair harness or connector.

    More about «Body control system (BCS)»:

    Precautions

    System

    Diagnosis system (BCM)

    BCM

    Inspection and adjustment

    U1000 CAN Comm circuit

    U1010 Control unit (CAN)

    U0415 Vehicle speed

    B2562 Low voltage

    Power supply and ground circuit

    Combination switch input circuit

    Combination switch output circuit

    BCM (Body control module)

    Combination switch

    Precautions

    System

    BCM

    Inspection and adjustment

    U1000 CAN Comm

    U1010 Control unit (CAN)

    Power supply and ground circuit

    Combination switch input circuit

    Combination switch output circuit

    BCM (Body control module)

    Combination switch

    Nissan Versa Sedan Service Manual / Electrical & power control / Body control system (BCS) / Power supply and ground circuit

    Nissan Versa Sedan Service Manual

    Categories


    © 2017-2024 Copyright www.niveguide.com