Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER"
The Supplemental Restraint System such as "AIR BAG" and "SEAT BELT PRE-TENSIONER", used along with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain types of collision. This system includes seat belt switch inputs and dual stage front air bag modules. The SRS system uses the seat belt switches to determine the front air bag deployment, and may only deploy one front air bag, depending on the severity of a collision and whether the front occupants are belted or unbelted.
Information necessary to service the system safely is included in the SR and SB section of this Service Manual.
WARNING:
PRECAUTIONS WHEN USING POWER TOOLS (AIR OR ELECTRIC) AND HAMMERS
WARNING:
PREPARATION
Commercial Service Tool

PERIODIC MAINTENANCE
Rear drum brakeExploded View 1. Shoe hold pin 2. Back plate 3. Plug 4. Brake shoe 5. Spring 6. Upper spring 7. Adjuster 8. Return spring 9. Brake drum 10. Boot 11. Piston 12. Piston cup 13. Spring 14. Wheel ...

Inspection and Adjustment INSPECTION When parking brake lever is operated with a force of 196 N (20 kg-f, 44 lb-f), make sure parking brake lever stroke is within the specified number of notches. ...
Hood lock control cable
HOOD LOCK CONTROL CABLE : Removal and
Installation
REMOVAL
Disconnect hood lock control cable assembly from hood lock assembly.
Refer to DLK "HOOD LOCK
: Removal and Installation".
Remove fender protector (LH). Refer to EXT "Removal and Installation".
Release hoo ...
Trunk lid finisher
Exploded View
1. Trunk lid finisher 2. Emblem 3. Rear view camera (if equipped)
Pawl Clip
Removal and Installation
REMOVAL
1. Remove trunk lid finisher inner. Refer to INT "Removal and Installation".
2. Remove trunk lid finisher nuts.
3. Disconnect the harness connectors from ...