Toyota
Nissan Versa
 Sedan Service Manual
Engine » Engine cooling system (CO) » Radiator
Radiator cap

RADIATOR CAP : Inspection

  • Check valve seat (A) of radiator cap.

(B) : Metal plunger

  • Replace the cap if the metal plunger cannot be seen around the edge of the black rubber gasket.
  • Replace the cap if deposits of waxy residue or other foreign material are on the black rubber gasket or the metal retainer.

RADIATOR CAP

  • Pull negativepressure valve to open it, and check that it closes completely when released.
  • Check that there is no dirt or damage on the valve seat of radiator cap negativepressure valve.
  • Make sure that the valve operates properly while opening and closing.

RADIATOR CAP

  • Check radiator cap relief pressure using a suitable tool (A) and Tool (B).

Tool number (B) : EG17650301 (J33984A)

  • When connecting the radiator cap to the Tool (B), apply water or coolant to the cap seal surface.
  • Replace radiator cap if there is an abnormality in the negativepressure valve, or if the radiator cap does not perform within specifications.

RADIATOR CAP

CAUTION:

When installing radiator cap, thoroughly wipe out the radiator filler neck to remove any waxy residue or foreign material.

    More about «Radiator»:

    Radiator cap

    Radiator

    Nissan Versa Sedan Service Manual / Engine / Engine cooling system (CO) / Radiator / Radiator cap

    Nissan Versa Sedan Service Manual

    Categories


    © 2017-2024 Copyright www.niveguide.com