Toyota
Nissan Versa
 Sedan Service Manual
Brakes » Brake system (BR) » Rear
Rear : Inspection

INSPECTION AFTER INSTALLATION

  1. Check the brake hoses and tubes for the following: no scratches; no twist and deformation; no looseness at connections.

    CAUTION: Clearance with brake hose and each parts being secured more than 10 mm (0.39 in) in unladen condition*.

    *: Fuel, engine coolant and lubricant are full. Spare tire, jack, hand tools and mats are in designated positions.

  2. Depress the brake pedal with a force of 785 N (80.1 kg-f, 176.5 lb-f) and hold down the pedal for approximately 5 seconds with the engine running. Check for any fluid leakage.

    CAUTION: Retighten the applicable connection to the specified torque and repair any abnormal (damaged, worn or deformed) part if any brake fluid leakage is present.

    More about «Rear»:

    Rear : Hydraulic Piping

    Rear : Removal and Installation

    Rear : Inspection

    Nissan Versa Sedan Service Manual / Brakes / Brake system (BR) / Rear / Rear : Inspection

    Nissan Versa Sedan Service Manual

    Categories


    © 2017-2024 Copyright www.niveguide.com