Nissan Versa (N17): Sensor rotor

FRONT SENSOR ROTOR

FRONT SENSOR ROTOR : Removal and Installation

REMOVAL

The front wheel sensor rotor is an integral part of the wheel hub and bearing assembly and can not be replaced individually. When replacing the front wheel sensor rotor replace the hub and bearing assembly.

Refer to FAX "Removal and Installation".

INSTALLATION

Refer to FAX "Removal and Installation".

REAR SENSOR ROTOR

REAR SENSOR ROTOR : Removal and Installation

REMOVAL

Remove the brake drum. Refer to BR "Exploded View".

Remove the sensor rotor from brake drum. Refer to BR "Disassembly and Assembly".

CAUTION: Do not reuse rear sensor rotor.

INSTALLATION

Installation is in the reverse order of removal.

ABS Actuator and electric unit (control unit)

Exploded View 1. ABS actuator and electric unit (control unit) 2. ABS actuator and electric unit (control unit) harness connector 3. Bushing 4. Bracket A. To master cylinder secondary side ...

Other materials:

Jump starting
To start your engine with a booster battery, the instructions and precautions below must be followed. WARNING If done incorrectly, jump starting can lead to a battery explosion, resulting in severe injury or death. It could also damage your vehicle. Explosive hydrogen gas is always pre ...

Front oil seal
FRONT OIL SEAL : Removal and Installation REMOVAL     1.     Remove the following parts. Remove wheel and tire. Front fender protector (RH). Drive belt. Crankshaft pulley.     2.     Remove front oil seal with ...

Categories


© 2017-2025 Copyright www.niveguide.com
0.0065