Toyota
Nissan Versa
 Sedan Service Manual
Restraints » SRS Airbag control system (SRC) » Diagnosis system (air bag)
SRS Final Check

DIAGNOSIS MODE

  1. Connect CONSULT.
  2. Confirm that zero point reset of OCS is complete.
  3. If no DTCs are detected on "SELF-DIAG RESULTS [CURRENT]", repair of SRS is completed. Go to step 4.

    If any DTCs are detected on "SELF-DIAG RESULTS [CURRENT]", the malfunction has not been repaired completely or another malfunction is being detected. Perform SRS Operation Check again. Refer to SRC "SRS Operation Check".

  4. Touch "ERASE".

    NOTE: Touching "ERASE" will clear the SRS memory of the malfunction ("SELF-DIAG [PAST]"). If "SELFDIAG [PAST]" is not erased, User Mode may show the previous system malfunction even if the malfunction has been repaired completely.

  5. Check that no malfunction is detected in "SELF-DIAG [PAST]".
  6. Exit Diagnosis Mode and disconnect the CONSULT.
  7. Perform SRS Operation Check. Refer to SRC "SRS Operation Check".

CONSULT Function (AIR BAG)

CONSULT can display each diagnostic item using the diagnostic test modes shown following.

Diagnostic Test Mode Diagnostic Item

Description

Ecu Identification ECU DISCRIMINATED NO. Air bag diagnosis sensor unit ECU discriminated number (identification number) or part number is displayed. Air bag diagnosis sensor unit has individual ECU discriminated number (identification number) or part number based on model and equipment.
Self Diagnostic Result SELF-DIAG RESULT [CURRENT] A current Self-diagnosis result (also indicated by the number of warning lamp flashes in the Diagnosis mode) is displayed on the CONSULT screen in real time. This refers to a malfunctioning part requiring repairs.
Work Support ZERO POINT RESET FUNCTION Perform zero point reset. Refer to SRC "ZERO POINT RESET : Special Repair Requirement".
Function Test CAR COMPUTER DIAG. System wide test results are
Special function SELF-DIAG [PAST] Diagnosis results previously stored in the memory are displayed on the CONSULT screen. The stored results will remain until memory erasing is executed.
TROUBLE DIAG RECORD With TROUBLE DIAG RECORD, diagnosis results previously erased by a reset operation can be displayed on the CONSULT screen.
SELF-DIAG RESULT [CAN] A current Self-diagnosis result [CAN] is displayed on the CONSULT screen in real time. Self-diagnosis result [CAN] can not be erased.
CAUSE OF WARNING
  • FUNCTION STATUS - "ON or "STOP is displayed according to OCS status recognized by OCS control unit.
  • STOP DETECTION - Displays number of times OCS STOP condition has been detected.
  • DETECTION RECORD - Displays number of times IGN ON has been detected since first STOP detection occurred.

ECU DIAGNOSIS INFORMATION

    More about «Diagnosis system (air bag)»:

    Diagnosis Description

    SRS Operation Check

    Trouble Diagnosis with CONSULT

    SRS Final Check

    Nissan Versa Sedan Service Manual / Restraints / SRS Airbag control system (SRC) / Diagnosis system (air bag) / SRS Final Check

    Nissan Versa Sedan Service Manual

    Categories


    © 2017-2024 Copyright www.niveguide.com