Diagnosis Procedure
CAUTION: The stopping distance on slippery road surfaces might be longer with the ABS operating than when the ABS is not operating.
1.CHECK ABS FUNCTION
Is the inspection result normal?
YES >> Inspection End.
NO >> Check brake system.
ABS FUNCTION DOES NOT OPERATE
Diagnosis Procedure
CAUTION: ABS does not operate when speed is 10 km/h (6 MPH) or lower.
1.CHECK ABS WARNING LAMP DISPLAY
Make sure that the ABS warning lamp turns OFF after ignition switch is turned ON or when driving.
Is the inspection result normal?
YES >> Inspection End.
NO >> Perform self diagnostic result. Refer to BRC "CONSULT Function (ABS)".
Diagnosis Procedure 1.CHECK BRAKE PEDAL STROKE Check brake pedal stroke. Refer to BR "Inspection and Adjustment". Is the stroke too big? YES >> Bleed air from brake line and ho ...
Diagnosis Procedure CAUTION: Under the following conditions, ABS is activated and vibration is felt when brake pedal is lightly depressed (just place a foot on it). However, this is normal. W ...
Shift position indicator circuit
Component Parts Function Inspection
1.CHECK SHIFT POSITION INDICATOR
Start the engine.
Shift the selector lever.
Check that the selector lever position and the shift position indicator
on the combination meter are identical.
Is the inspection result normal?
YES >> INSPECTION ...
Rear suspension beam
Exploded View
1. Rear suspension beam
Removal and Installation
REMOVAL
Remove the wheel and tire assemblies using power tool. Refer to WT
"Adjustment".
Remove wheel sensor and sensor harness. Refer to BRC "REAR WHEEL SENSOR
: Removal and
Installation".
Re ...