Nissan Versa

 Sedan Service Manual

Driver information & multimedia » Warning chime system (WCS)
The seat belt reminder warning continues sounding, or does not sound

Description

• Seat belt reminder warning does not sound.
• Seat belt reminder warning sounds continuously.

Diagnosis Procedure

NOTE: To identify combination meter type, refer to MWI "Information" or MWI "Information".

1.CHECK SEAT BELT WARNING LAMP

1. Turn ignition switch ON.

2. Check operation of seat belt warning lamp in combination meter.

Is the inspection result normal?

YES >> Replace combination meter. Refer to MWI "Removal and Installation" (TYPE A) or MWI "Removal and Installation" (TYPE B).

NO >> GO TO 2.

2.CHECK SEAT BELT BUCKLE SWITCH (LH) SIGNAL CIRCUIT

Perform check for seat belt buckle switch (LH) signal circuit. Refer to WCS "TYPE A : Diagnosis Procedure" (TYPE A) or WCS "TYPE B : Diagnosis Procedure" (TYPE B).

Is the inspection result normal?

YES >> GO TO 3.

NO >> Repair harness or connector.

3.CHECK SEAT BELT BUCKLE SWITCH (LH)

Perform check for seat belt buckle switch (LH). Refer to WCS "TYPE A : Component Inspection" (TYPE A) or WCS "TYPE B : Component Inspection" (TYPE B).

Is the inspection result normal?

YES >> Replace combination meter. Refer to MWI "Removal and Installation" (TYPE A) or MWI "Removal and Installation" (TYPE B).

NO >> Replace seat belt buckle (LH). Refer to SB"SEAT BELT BUCKLE : Removal and Installation".

Precautions

System

Diagnosis system (combination meter)

Diagnosis and repair workflow

Power supply and ground circuit

Meter buzzer circuit

Seat belt buckle switch signal circuit

Key switch signal circuit (without intelligent key)

Parking brake switch signal circuit

The parking brake release warning continues sounding, or does not sound

The seat belt reminder warning continues sounding, or does not sound

The light reminder warning does not sound

The key warning does not sound (without intelligent key)