BRAKE FLUID LEVEL AND LEAKS : Inspection
BRAKE FLUID LEVEL

Road wheelROAD WHEEL : Adjustment BALANCING WHEELS (ADHESIVE WEIGHT TYPE) Preparation Before Adjustment Remove inner and outer balance weights from the road wheel. Using releasing agent, remove double-face ...

BRAKE LINES AND CABLES : Inspection BRAKE LINES 1. Check brake lines (pipes and hoses) for cracks, deterioration or other damage. Replace any damaged parts. 2. Check for brake fluid leaks by fully ...
Engine control system
ENGINE CONTROL SYSTEM : Component Parts Location
1. Mass air flow sensor
(with intake air temperature sensor)
2. Electric throttle control actuator
(with built in throttle position sensor
and throttle control motor)
3. EVAP canister purge volume control
solenoid valve
4. Cooling fan mot ...
Shift P Warning lamp
Component Function Check
1.CHECK FUNCTION
Select INTELLIGENT KEY of BCM using CONSULT.
Select LCD in ACTIVE TEST mode.
Touch SET P to check that it works normally.
Is the inspection result normal?
YES >> Shift P warning lamp is OK.
NO >> Refer to DLK "Diagnosis Proce ...