Toyota
Nissan Versa
 Sedan Service Manual
Driver information & multimedia » Audio, visual & navigation system (AV) » Inspection and adjustment
Configuration (AV control unit)

CONFIGURATION (AV CONTROL UNIT) : Description

Vehicle specification needs to be written with CONSULT because it is not written after replacing AV control unit.

Configuration has three functions as follows:

CAUTION:

  • When replacing AV control unit, you must perform "Select Saved Data List" or "After Replace ECU" with CONSULT.
  • Complete the procedure of "Select Saved Data List" or "After Replace ECU" in order.
  • If you set incorrect "Select Saved Data List" or "After Replace ECU", incidents might occur.
  • Configuration is different for each vehicle model. Confirm configuration of each vehicle model.
  • Never perform "Select Saved Data List" or "After Replace ECU" except for new AV control unit.

CONFIGURATION (AV CONTROL UNIT) : Work Procedure

1.WRITING MODE SELECTION

CONSULT

Select "Reprogramming, Configuration" of AV control unit.

When writing saved data>>GO TO 2.

When writing manually>>GO TO 3.

2.PERFORM "SAVED DATA LIST"

CONSULT

Automatically "Operation Log Selection" window will display if "Before Replace ECU" was performed. Select applicable file from the "Save Data List" and press "Confirm".

>> Work End.

3.PERFORM "AFTER REPLACE ECU" OR "MANUAL CONFIGURATION"

CONSULT

1. Select "After Replace ECU" or "Manual Configuration".

2. Identify the correct model and configuration list. Refer to AV "CONFIGURATION (AV CONTROL UNIT) : Configuration List".

3. Confirm and/or change setting value for each item.

CAUTION: Thoroughly read and understand the vehicle specification. ECU control may not operate normally if the setting is not correct.

4. Select "Next".

CAUTION: Make sure to select "Next", confirm each setting value and press "OK" even if the indicated configuration of brand new AV control unit is same as the desirable configuration. If not, configuration which is set automatically by selecting vehicle model can not be memorized.

5. When "Completed", select "End".

>> GO TO 4.

4.OPERATION CHECK

Confirm that each function controlled by AV control unit operates normally.

>> Work End.

CONFIGURATION (AV CONTROL UNIT) : Configuration List

CAUTION: Thoroughly read and understand the vehicle specification. Incorrect settings may result in abnormal control of ECU.

Items which confirm vehicle specifications

DTC/CIRCUIT DIAGNOSIS

    More about «Inspection and adjustment»:

    Additional service when replacing AV control unit

    Configuration (AV control unit)

    Nissan Versa Sedan Service Manual / Driver information & multimedia / Audio, visual & navigation system (AV) / Inspection and adjustment / Configuration (AV control unit)

    Nissan Versa Sedan Service Manual

    Categories


    © 2017-2024 Copyright www.niveguide.com