Toyota
Nissan Versa
 Sedan Service Manual
Engine » Engine control system (EC) » Trouble diagnosis specification value
Description

The specification (SP) value indicates the tolerance of the value that is displayed in "SPEC" of "DATA MONITOR" mode of CONSULT during normal operation of the Engine Control System. When the value in "SPEC" of "DATA MONITOR" mode is within the SP value, the Engine Control System is confirmed OK. When the value in "SPEC" of "DATA MONITOR" mode is NOT within the SP value, the Engine Control System may have one or more malfunctions.

The SP value is used to detect malfunctions that may affect the Engine Control System, but will not light the MIL.

The SP value will be displayed for the following three items:

  • B/FUEL SCHDL (The fuel injection pulse width programmed into ECM prior to any learned on board correction)
  • A/F ALPHAB1 (The mean value of airfuel ratio feedback correction factor per cycle)
  • MAS A/F SEB1 (The signal voltage of the mass air flow sensor)
    More about «Trouble diagnosis specification value»:

    Description

    Component Function Check

    Diagnosis Procedure

    Nissan Versa Sedan Service Manual / Engine / Engine control system (EC) / Trouble diagnosis specification value / Description

    Nissan Versa Sedan Service Manual

    Categories


    © 2017-2019 Copyright www.niveguide.com