Toyota
Nissan Versa
 Sedan Service Manual
Engine » Engine control system (EC) » Diagnosis description
Diagnosis description : malfunction indicator lamp (MIL)

When emissionrelated ECU detects a malfunction in the emission control systems components and/or the powertrain control components (which affect vehicle emissions), it turns on/blinks MIL to inform the driver that a malfunction has been detected.

    1.   The MIL illuminates when ignition switch is turned ON (engine is not running).

NOTE:

Check the MIL circuit if MIL does not illuminate.

    2.   When the engine is started, the MIL should go off.

NOTE:

If MIL continues to illuminate/blink, perform selfdiagnoses and inspect/repair accordingly because an emissionrelated ECU has detected a malfunction in the emission control systems components and/or the powertrain control components (which affect vehicle emissions).

Diagnosis description : malfunction indicator lamp (mil)

    More about «Diagnosis description»:

    Diagnosis description : 1st trip detection logic and two trip detection logic

    Diagnosis description : dtc and freeze frame data

    Diagnosis description : counter system

    Diagnosis description : driving pattern

    Diagnosis description : system readiness test (SRT) code

    Diagnosis description : permanent diagnostic trouble code (permanent DTC)

    Diagnosis description : malfunction indicator lamp (MIL)

    On Board Diagnosis Function

    Consult function

    Nissan Versa Sedan Service Manual / Engine / Engine control system (EC) / Diagnosis description / Diagnosis description : malfunction indicator lamp (MIL)

    Nissan Versa Sedan Service Manual

    Categories


    © 2017-2019 Copyright www.niveguide.com