EXHAUST SYSTEM : Inspection
Check exhaust pipes, muffler, and mounting for improper attachment, leaks, cracks, damage or deterioration. Repair or replace as necessary.

Spark plugSPARK PLUG : Exploded View 1. Ignition coil 2. Spark plug SPARK PLUG : Removal and Installation REMOVAL 1. Remove ignition coil. Refer to EM "Removal and Installation". CAUTION: ...

CVT FLUID : Inspection FLUID LEAKAGE Check transaxle surrounding area (oil seal and plug etc.) for fluid leakage. If anything is found, repair or replace damaged parts and adjust CVT fluid ...
Additional service when replacing
ECM
Description
When replacing ECM, the following procedure must be performed.
PROGRAMMING OPERATION
NOTE:
After replacing with a blank ECM, programming is required to write ECM
information. Be sure to follow the procedure
to perform the programming.
Work Procedure
1.CHECK ECM PART NUMBER
Che ...
Fuel level sensor unit
Disassembly and Assembly
Fuel Level Sender Unit
1. Harness connectors 2. Level sending unit module 3. Fuel temperature sensor
4. Float arm assembly
Disassembly
NOTE:
Before disassembly, note the proper placement of the wires to the correct
terminals and correct wire routing to
the term ...