COMMON ITEM
COMMON ITEM : CONSULT Function (BCM - COMMON ITEM)
APPLICATION ITEM
CONSULT performs the following functions via CAN communication with BCM.
SYSTEM APPLICATION
BCM can perform the following functions.
DOOR LOCK
DOOR LOCK : CONSULT Function (BCM - DOOR LOCK)
DATA MONITOR
ACTIVE TEST
WORK SUPPORT
* : Initial setting
MULTI REMOTE ENT
MULTI REMOTE ENT : CONSULT Function (BCM - MULTI REMOTE ENT)
DATA MONITOR
ACTIVE TEST
WORK SUPPORT
TRUNK
TRUNK : CONSULT Function (BCM - TRUNK)
DATA MONITOR
ECU DIAGNOSIS INFORMATION
BCM, IPDM E/R
List of ECU Reference
ECU | Reference |
BCM | BCS "Reference Value" |
BCS "Wiring Diagram" | |
BCS "Fail-safe" | |
BCS "DTC Inspection Priority Chart" | |
BCS "DTC Index" | |
IPDM E/R | PCS "Reference Value" |
PCS "Wiring Diagram" | |
PCS"Fail-Safe" | |
PCS "DTC Index" |
WIRING DIAGRAM
POWER DOOR LOCK SYSTEM
Wiring Diagram
REMOTE KEYLESS ENTRY SYSTEM
Wiring Diagram
TRUNK LID OPENER SYSTEM
Wiring Diagram
BASIC INSPECTION
TRUNK LID OPENER SYSTEM : System Diagram TRUNK LID OPENER SYSTEM : System Description TRUNK LID OPEN OPERATION When the trunk release button of the keyfob is pressed, the trunk release si ...
Work Flow OVERALL SEQUENCE DETAILED FLOW 1.GET INFORMATION FOR SYMPTOM Get the detailed information from the customer about the symptom (the condition and the environment when the incident/ ...
Additional service when replacing
ECM
Description
When replacing ECM, the following procedure must be performed.
PROGRAMMING OPERATION
NOTE:
After replacing with a blank ECM, programming is required to write ECM
information. Be sure to follow the procedure
to perform the programming.
Work Procedure
1.CHECK ECM PART NUMBER
Che ...
U0073 Communication bus a off
DTC Logic
DTC
Trouble diagnosis name
DTC detecting condition
Possible causes
U0073
Control Module Communication
Bus "A" Off
When the ignition switch is ON,
TCM detects a bus-off error
continuously for 2 seconds or
more.
Harness or connector
(CA ...