For additional information, refer to Audio operation precautions in this section.
1. CD eject button
2. RPT button
3. RDM button
4. Display screen
5. SCAN button
6. USB button
7. AUX button
8. A-Z button
9. ENTER button and TUNE/MENU knob
10. (back) button
11. SETUP button
12. DISP button
13. Station select (1-6) buttons
14. Forward and Backward
SEEK/TRACK buttons
15. VOL (volume) control knob/ (power) button
16. CD button
17. FM-AM button
Audio main operation
(power) button/ VOL (volume)
control
knob
Place the ignition switch in the ACC or ON
position, then press the (power)
button. If
you listen to the radio with the engine not running,
place the ignition in the ACC position. The mode
(radio or CD) that was playing immediately before
the system was turned off resumes playing.
When no CD is loaded, the radio comes on.
Pressing the (power)
button again turns
the system off.
Turn the VOL (volume) control knob to the right to increase volume or to the left to decrease volume.
AUX button
The AUX IN audio input jack accepts any standard analog audio input such as from a portable cassette tape/CD player, MP3 player or a laptop computer. Press the AUX button to play a compatible device plugged into the AUX IN jack.
Pressing the AUX button repeatedly will cycle through available input sources: AUX line in→USB (if so equipped)→AUX line in
NOTE:
Sources only shown in menu if they are connected and/or detected.
DISP (display) button
Pressing the DISP button displays song information, if available, such as artist, album, track name, folder name, and source.
NOTE:
The DISP button only provides this information in non-radio modes.
How to use the SETUP button
To select and/or adjust several functions, features and modes that are available for your vehicle: 1. Press the SETUP button.
2. Turn the TUNE/MENU knob until the desired item is selected on the menu list and then press the ENTER button.
Menu item | Result |
Audio
|
Selecting this item allows user to adjust various audio settings.
|
TUNE/MENU knob/Enter button
Turn the TUNE/MENU knob to the left or right to scroll and then press ENTER to select desired item.
Clock Set
1. Press the SETUP button.
2. Turn the TUNE/MENU knob to select CLOCK.
3. Press the ENTER button.
4. Turn the TUNE/MENU knob to select "set time".
5. Press the ENTER button.
6. Rotate the TUNE/MENU knob to adjust hours.
7. Press the ENTER button.
8. Turn the TUNE/MENU knob to adjust minutes.
9. Press the ENTER button to finish.
The display will return to the regular clock display after 10 seconds.
A-Z button
When listening to music via USB or iPod, pressing the A-Z button will launch a quick search function in music browser that will allow user to search for music alphabetically using the TUNE/MENU knob.
RDM and RPT button
When listening to music via USB or iPod, pressing the RDM button will shuffle the songs being played. Pressing the RPT button will repeat the song being played.
(back) button
Pressing the (back)
button will return the
user to the previous menu.
FM/AM radio operation
FM-AM button
Press the FM*AM button to change the band as follows: AM → FM1 → FM2 → AM
If another audio source is playing when the FM*AM button is pressed, the audio source playing will automatically be turned off and the last radio station played will begin playing.
If the FM-AM button is pressed for more than 1.5 seconds, the AUTOSTORE function will be initiated. The "AST" icon will appear and "AUTOSTORE" may appear on the display screen, a beep is heard and the radio mutes. The system will then automatically detect the 6 stations with the strongest frequency and save them as presets.
Once AUTOSTORE is complete, the "AST" icon will disappear and "AUTOSTORE COMPLETE" may appear on the display screen.
TUNE/MENU knob (Tuning)
Turn the TUNE/MENU knob to the left or right for manual tuning.
SEEK tuning
Press the SEEK/TRACK button
or
to tune from low to high or high to low frequencies
and to stop at the next broadcasting station.
Hold either button to tune continuously. Then release button once desired frequency is reached.
Station select (1 to 6) memory operations
Twelve stations can be set for the FM band (6 for FM1, 6 for FM2) and six stations can be set for the AM band.
1. Choose the radio band AM, FM1 or FM2 using the AM or FM button.
2. Tune to the desired station using manual or SEEK tuning. Press and hold any of the desired station memory buttons (1 - 6) until a beep sound is heard.
3. The station memory position (P1-P6) will now be displayed next to the band. Programming is now complete.
4. Other buttons can be set in the same manner. If the battery cable is disconnected or if the fuse opens, the radio memory will be canceled. In that case, reset the desired stations.
Compact disc (CD) player operation
If the radio is already operating, it automatically turns off and the compact disc begins to play.
CD button
When the CD button is pressed with the system off and the compact disc loaded, the system will turn on and the compact disc will start to play.
When the CD button is pressed with a compact disc loaded and the radio playing, the radio will automatically be turned off and the compact disc will start to play.
DISP button
When the DISP button is pressed while a CD is playing, the display will change as follows: CD: Track Time → Album → Artist →Track Time CD with MP3 or WMA: Track time→ Folder title → Artist → Song title → Track number
SEEK/TRACK (Reverse or
Fast Forward) button
Press and hold the SEEK/TRACK button
or
for 1.5 seconds while the
compact disc
is playing to reverse or fast forward the track
being played. The compact disc plays at an increased
speed while reversing or fast forwarding.
When the button is released, the compact disc returns to normal play speed.
SEEK/TRACK button
Press the SEEK/TRACK button
while a
CD or MP3/WMA CD is playing to return to the
beginning of the current track. Press the
SEEK/TRACK button
several
times to skip
backward several tracks.
Press the SEEK/TRACK button
while a
CD or MP3/WMA CD is playing to advance one
track. Press the SEEK/TRACK button
several
times to skip forward several tracks. If the last
track on a CD is skipped, the first track on the
disc is played. If the last track in a folder of an
MP3/WMA CD is skipped, the first track of the
next folder is played.
TUNE/MENU knob (MP3/WMA CD only)
If an MP3/WMA CD with multiple folders is playing, press the ENTER button to view the track list and press the button again to view the folder list.
To select a folder or track, turn the TUNE/MENU knob to scroll through the folders/songs and press the ENTER button to make selection.
RPT (repeat) button
When the RPT button (Preset station number 1) is pressed while a compact disc is playing, the repeat mode is toggled.
RDM (random) button
When the RDM button (Preset station number 2) is pressed while a compact disc is playing, the Random mode is toggled.
CD EJECT button
When the button is pressed with
a compact
disc loaded, the compact disc will eject and
the last source will be played.
Additional features
For additional information, refer to "iPod player operation without Navigation System" in this section.
For additional information, refer to "USB (Universal Serial Bus) connection port (models without Navigation System)" in this section.
For additional information, refer to "Bluetooth streaming audio without Navigation System (Type A)" in this section.