Nissan Versa (N17): Cooling fan control

Cooling fan control : system diagram

COOLING FAN CONTROL : System Diagram

Cooling fan control : system description

INPUT/OUTPUT SIGNAL CHART

Sensor Input signal to ECM ECM function Actuator
Crankshaft position sensor (POS) Camshaft position sensor (PHASE) Engine speed*1 Piston position Cooling fan speed request signal IPDM E/R ↓ Cooling fan relay ↓ Cooling fan motor
Engine coolant temperature sensor Engine coolant temperature
Battery Battery voltage*1
Refrigerant pressure sensor Refrigerant pressure
Combination meter Vehicle speed signal*2
BCM A/C ON signal*2 Blower fan signal*2

*1: The ECM determines the start signal status by the signals of engine speed and battery voltage.

*2: This signal is sent to ECM through CAN communication line.

SYSTEM DESCRIPTION (EXCEPT FOR SINGLE CONNECTOR COOLING FAN WITHOUT A/C)

ECM controls cooling fan speed corresponding to vehicle speed, engine coolant temperature, refrigerant pressure, air conditioner ON signal. Then control system has 3step control [HIGH/LOW/OFF].

Cooling Fan Operation

Cooling Fan Operation

Cooling Fan Relay Operation

The ECM controls cooling fan relays through CAN communication line.

Cooling fan speed Cooling fan low relay Cooling fan high relay Cooling fan relay
Stop (OFF) OFF OFF OFF
Low (LOW) ON OFF OFF
High (HI) ON ON ON

SYSTEM DESCRIPTION (FOR SINGLE CONNECTOR COOLING FAN WITHOUT A/C)

ECM controls cooling fan speed corresponding to vehicle speed, engine coolant temperature, refrigerant pressure, air conditioner ON signal. Then control system has 2step control [HIGH/OFF].

Cooling Fan Operation

Cooling Fan Operation

Cooling Fan Relay Operation

The ECM controls cooling fan relays through CAN communication line.

Cooling fan speed Cooling fan low relay
Stop (OFF) OFF
Operate (HI) ON

Air conditioning cut control

AIR CONDITIONING CUT CONTROL : System Diagram AIR CONDITIONING CUT CONTROL : System Description INPUT/OUTPUT SIGNAL CHART Sensor Input signal to ECM ECM function Actuator ...

Evaporative emission system

EVAPORATIVE EMISSION SYSTEM : System Diagram EVAPORATIVE EMISSION SYSTEM : System Description INPUT/OUTPUT SIGNAL CHART Sensor Input signal to ECM ECM function Actuator ...

Other materials:

Brake and clutch (if so equipped) fluid
For additional information on brake fluid specification, refer to "Recommended fluids/lubricants and capacities" in the "Technical and consumer information" section of this manual. WARNING Use only new fluid from a sealed container. Old, inferior or contaminated fluid may damage the br ...

Water outlet
Exploded View M/T models 1. Engine coolant temperature sensor 2. Clamp 3. Gasket 4. Clamp 5. Bracket 6. Clamp 7. Water outlet 8. Clamp 9. Clamp 10. Cylinder block heater (Canada) A. From electric throttle control actuator B. To radiator C. From heater core D. To heater core E. To electric ...

Categories


© 2017-2026 Copyright www.niveguide.com
0.0069