Nissan Versa (N17): Fender cover

Nissan Versa 2nd generation (N17) Service Manual / Body exterior, doors, roof & vehicle security / Door & lock (DLK) / Fender cover

FENDER COVER : Removal and Installation

REMOVAL

Fully open hood assembly.
Disengage pawls beginning at the front of the fender cover and working toward the rear of vehicle and then remove front fender cover.

CAUTION: When performing the procedure after removing fender cover, protect the lower windshield glass with urethane etc.

: Pawl

REMOVAL

INSTALLATION

Installation is in the reverse order of removal.

CAUTION:

For installation, engage pawls to front fender and cowl top cover in numerical order shown.
Install so that there is no clearance between windshield and cowl top cover.

INSTALLATION

FRONT DOOR

Exploded View

INSTALLATION

1. Front door assembly 2. Grommet 3. Striker bolt 4. Door striker 5. Bumper rubber 6. Door check link 7. Door hinge (lower) 8. Door hinge (upper) 9. Grommet (Drive side only)

Front fender

FRONT FENDER : Removal and Installation CAUTION: Use a shop cloths to protect the body from being damaged during removal and installation. REMOVAL Remove fender protector. Refer to EXT " ...

Other materials:

Shift change control
Shift change control : system diagram Shift change control : system description The clutch is controlled with the optimum timing and oil pressure by the engine speed, engine torque information, etc. Shift Change System Diagram *1: Full phase real-time feedback control monitors m ...

Seat belt warning lamp system
SEAT BELT WARNING LAMP SYSTEM : System Diagram SEAT BELT WARNING LAMP SYSTEM : System Description The seat belt warning lamp (1) will remind the driver if the driver or front passenger seat belt should be buckled. The system works in conjunction with the occupant classification system. R ...

Nissan Versa (N17): Fender cover

Front fender

Door assembly

Other materials:

Categories