Nissan Versa (N17): Floor trim

Nissan Versa 2nd generation (N17) Service Manual / Body interior / Interior (INT) / Floor trim

Exploded View

Exploded View

1. Harness clip A 2. Harness clip B 3. Floor carpet 4. Carpet hook 5. Front floor spacer (RH) 6. Front floor spacer (LH) 7. Rear floor spacer (LH) 8. Rear floor spacer (RH) Front Clip

Removal and Installation

REMOVAL

  1. Remove front seat assemblies (LH/RH). Refer to SE "DRIVER SIDE : Removal and Installation".
  2. Remove rear seat cushion. Refer to SE "Removal and Installation - Seat Cushion Assembly".
  3. Remove center console lower. Refer to IP "Removal and Installation".
  4. Remove dash side finishers (LH/RH). Refer to INT "DASH SIDE FINISHER : Removal and Installation".
  5. Remove center pillar lower finishers (LH/RH). Refer to INT "CENTER PILLAR LOWER FINISHER : Removal and Installation".
  6. Disconnect diagnosis sensor unit. Refer to SR "Removal and Installation".
  7. Remove shift selector assembly.
  • 5MT: Refer to TM "Removal and Installation".
  • 4AT: Refer to TM "Removal and Installation"
  • CVT: Refer to TM, "Removal and Installation"
  1. Remove A/C unit assembly bolt (C) and bracket (1) from vehicle.
  2. Remove instrument panel lower bracket bolt (B) and screw (A) and reposition bracket as necessary to remove floor carpet.

REMOVAL

    10.   Release carpet hook clip with a suitable tool (A) and remove carpet hook.

: Clip

REMOVAL

    11.   Release pawl using a suitable tool (A) and open the harness clip.

: Pawl

REMOVAL

    12.   Remove floor carpet.

INSTALLATION

Installation is in the reverse order of removal.

Rear parcel shelf finisher

Exploded View 1. High-mounted stop lamp 2. Rear parcel shelf finisher 3. Seat belt finisher 4. Seatback latch cover 5. Top tether strap anchor 6. Top tether strap anchor finisher Front Paw ...

Headlining

Exploded View 1. Headlining assembly 2. Sun visor assembly (RH) 3. Sun visor assembly (RH) 4. Map lamp (if equipped) 5. Sun visor holder (LH) 6. Sun visor assembly (LH) 7. Microphone finisher ...

Other materials:

Brakes
If the brakes do not operate properly, have the brakes checked. It is recommended that you visit a NISSAN dealer for this service. Self-adjusting brakes Your vehicle is equipped with self-adjusting brakes. The front disc-type brakes self-adjust every time the brake pedal is applied. The rea ...

Lock-up control
Lock-up control : system diagram Lock-up control : system description The torque converter clutch piston in the torque converter is engaged to eliminate torque converter slip to increase power transmission efficiency. The torque converter clutch control valve operation is controlle ...

Categories


© 2017-2025 Copyright www.niveguide.com
0.0067