Nissan Versa (N17): Rear parcel shelf finisher

Nissan Versa 2nd generation (N17) Service Manual / Body interior / Interior (INT) / Rear parcel shelf finisher

Exploded View

Exploded View

1. High-mounted stop lamp 2. Rear parcel shelf finisher 3. Seat belt finisher 4. Seatback latch cover 5. Top tether strap anchor 6. Top tether strap anchor finisher Front Pawl

Removal and Installation

REMOVAL

  1. Remove high-mounted stop lamp. Refer to EXL "Removal and Installation".
  2. Remove rear pillar finisher. Refer to INT "REAR PILLAR FINISHER : Removal and Installation".
  3. Remove rear seat belt floor anchor bolts. Refer to SB "SEAT BELT RETRACTOR : Removal and Installation".
  4. Release seat belt finisher pawls using a suitable tool (A) and remove seat belt finisher.

: Pawl

REMOVAL

  1. Fold rear seatbacks down (60:40 split seatback) or remove fixed seatback. Refer to SE "Removal and Installation - Fixed Seatback".
  2. Remove seatback latch cover clips and seatback latch cover.
  3. Remove rear parcel shelf finisher clips (A).

REMOVAL

    8.   Pull rear parcel shelf finisher toward front and remove rear parcel shelf finisher.

: Front

REMOVAL

    9.   Release anchor finisher pawls and remove anchor finishers and anchors from rear parcel shelf finisher (if necessary).

INSTALLATION

Installation is in the reverse order of removal.

Rear pillar finisher

REAR PILLAR FINISHER : Removal and Installation REMOVAL Partially remove rear body side welt. Refer to INT "BODY SIDE WELT : Removal and Installation". Remove rear seat cushion. Re ...

Floor trim

Exploded View 1. Harness clip A 2. Harness clip B 3. Floor carpet 4. Carpet hook 5. Front floor spacer (RH) 6. Front floor spacer (LH) 7. Rear floor spacer (LH) 8. Rear floor spacer (RH) Fro ...

Other materials:

Service data and specifications (SDS)
General Specification CAUTION: Use only Genuine NISSAN CVT Fluid NS-3. Do not mix with other fluid. Use only Genuine NISSAN CVT Fluid NS-3. Using transmission fluid other than Genuine NISSAN CVT Fluid NS-3 will damage the CVT, which is not covered by the (NISSAN new vehicle limi ...

Transmitter wake up operation
Description This procedure must be performed after replacement of a transmitter or the BCM, or rotation of the wheels. Work Procedure NOTE: This procedure must be done after replacement of a TPMS transmitter or BCM. New replacement transmitters are provided "asleep" and must first ...

Categories


© 2017-2025 Copyright www.niveguide.com
0.0078