Nissan Versa (N17): Fuel filler lid

Nissan Versa 2nd generation (N17) Service Manual / Body exterior, doors, roof & vehicle security / Door & lock (DLK) / Fuel filler lid

FUEL FILLER LID : Removal and Installation

REMOVAL

1. Fully open fuel filler lid.

2. Remove fuel cap pin (1).

REMOVAL

3. Remove fuel filler lid screws and fuel filler lid.

INSTALLATION

Installation is in the reverse order of removal.

CAUTION: After installation, check fuel filler lid assembly open/close, lock/unlock operation.

Trunk lid opener cable

TRUNK LID OPENER CABLE : Removal and Installation REMOVAL 1. Remove trunk lid striker. Refer to DLK "TRUNK LID STRIKER : Removal and Installation". 2. Remove trunk side finisher (LH). R ...

Fuel filler opener cable

FUEL FILLER OPENER CABLE : Removal and Installation REMOVAL 1. Remove hood and fuel filler handle assembly bolts (A). 2. Disconnect fuel filler lid opener cable (2) by pulling downward and th ...

Other materials:

Transaxle
Transaxle : cross-sectional view 1. Converter housing 2. Oil pump 3. Low clutch 4. Rear planetary gear 5. Low & reverse brake 6. Front planetary gear 7. Low one-way clutch 8. High clutch 9. Reverse clutch 10. 2-4 brake band (Brake band) 11. Band servo piston 12. Side cover 13. Output ...

BCM (Body control module)
Removal and Installation CAUTION: Before replacing BCM, perform "READ CONFIGURATION" to save or print current vehicle specification. Refer to BCS "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT (BCM) : Description". REMOVAL 1. Disconnect the negative battery terminal. Refer to P ...

Categories


© 2017-2025 Copyright www.niveguide.com
0.0082