Nissan Versa (N17): Hood lock

Nissan Versa 2nd generation (N17) Service Manual / Body exterior, doors, roof & vehicle security / Door & lock (DLK) / Hood lock

HOOD LOCK : Removal and Installation

REMOVAL

  1. Remove hood lock assembly bolts and hood lock assembly.
  2. Disconnect hood lock control cable assembly (2) from hood lock assembly (1).

REMOVAL

INSTALLATION

Installation is in the reverse order of removal.

CAUTION:

  • Be careful not to bend the cable too much, keep the radius 100 mm (3.94 in) or more.
  • After installation, check that hood lock control cable is properly engaged with hood lock.
  • After installation, perform hood adjustment procedure. Refer to DLK "HOOD ASSEMBLY : Adjustment".
  • After adjusting, perform hood lock control inspection. Refer to DLK "Inspection".

Trunk lid weather-strip

TRUNK LID WEATHER-STRIP : Removal and Installation REMOVAL Remove trunk lid weatherstrip from the trunk lid opening. CAUTION: Do not pull excessively on weatherstrip. INSTALLATION 1. Working fro ...

Hood lock control cable

HOOD LOCK CONTROL CABLE : Removal and Installation REMOVAL Disconnect hood lock control cable assembly from hood lock assembly. Refer to DLK "HOOD LOCK : Removal and Installation&quo ...

Other materials:

Keys
Type A (if so equipped) 1. Master key 2. Valet key 3. Key number plate A key number plate is supplied with your keys. Record the key number and keep it in a safe place (such as your wallet), not in the vehicle. If you lose your keys, it is recommended that you visit a NISSAN dealer for ...

Vehicle Dynamic Control (VDC) system (if so equipped)
The VDC system uses various sensors to monitor driver inputs and vehicle motion. Under certain driving conditions, the VDC System helps to perform the following functions: Controls brake pressure to reduce wheel slip on one slipping drive wheel so power is transferred to a non slipping drive w ...

Categories


© 2017-2025 Copyright www.niveguide.com
0.0098