Diagnosis Procedure
1.CHECK AUTOMATIC LOCK/UNLOCK SELECT SETTING IN WORK SUPPORT
Refer to BCS "DOOR LOCK : CONSULT Function (BCM - DOOR LOCK)".
Is the inspection result normal?
YES >> GO TO 2.
NO >> Set Unlock Only or Lock/Unlock in AUTOMATIC LOCK/UNLOCK SELECT.
2.CHECK AUTOMATIC DOOR UNLOCK SELECT SETTING IN WORK SUPPORT
Refer to BCS "DOOR LOCK : CONSULT Function (BCM - DOOR LOCK)".
Is the inspection result normal?
YES >> GO TO 3.
NO >> Set MODE 1 or MODE 3 in AUTOMATIC DOOR UNLOCK SELECT.
3.REPLACE BCM
Is the result normal?
YES >> Inspection End.
NO >> Check intermittent incident. Refer to GI "Intermittent Incident".
Diagnosis Procedure 1.CHECK AUTOMATIC LOCK/UNLOCK SELECT SETTING IN WORK SUPPORT Select DOOR LOCK of BCM using CONSULT. Select AUTOMATIC LOCK/UNLOCK SELECT in WORK SUPPORT mode. Check AUTOMAT ...
Diagnosis Procedure 1.CHECK HAZARD ANSWER BACK SETTING IN WORK SUPPORT Select INTELLIGENT KEY of BCM using CONSULT. Select HAZARD ANSWER BACK in WORK SUPPORT mode. Check the HAZARD ANSWER BAC ...
Steering wheel
Tilt operation
Push the lock lever 1 down and adjust the
steering wheel up or down 2 to the desired
position.
Pull the lock lever 1 up to lock the steering
wheel in place.
WARNING
Do not adjust the steering wheel while
driving. You could lose control of your
vehicle and cause an accid ...
Front fender
FRONT FENDER : Removal and Installation
CAUTION:
Use a shop cloths to protect the body from being damaged during removal and
installation.
REMOVAL
Remove fender protector. Refer to EXT "Removal and Installation".
Remove front bumper fascia and bumper side bracket. Refer to EXT
...