Nissan Versa (N17): Trunk lid lock

Nissan Versa 2nd generation (N17) Service Manual / Body exterior, doors, roof & vehicle security / Door & lock (DLK) / Trunk lid lock

TRUNK LID LOCK : Removal and Installation

REMOVAL

1. Remove trunk lid finisher (if equipped). Refer to INT "Removal and Installation".

2. Release rod holder (1) by lifting upward, and then separate trunk lid lock rod (3) from trunk lid lock assembly (2).

REMOVAL

3. Remove trunk lid lock assembly bolts.

4. Disconnect harness connector and then remove trunk lid lock assembly (1).

REMOVAL

INSTALLATION

Installation is in the reverse order of removal.

CAUTION:

  • After installation, check trunk lid open/close, lock/unlock operation.
  • Check trunk lid lock assembly for poor lubrication. Apply a suitable multi-purpose grease to trunk lid lock if necessary.

INSTALLATION

Outside handle

OUTSIDE HANDLE : Removal and Installation REMOVAL 1. Fully close rear door glass. 2. Remove rear door finisher. Refer to INT "Removal and Installation". 3. Remove sealing screen. NOTE ...

Trunk lid opener handle

TRUNK LID OPENER HANDLE : Removal and Installation REMOVAL 1. Remove front kicking plate (LH). Refer to INT "KICKING PLATE INNER : Removal and Installation". 2. Disengage pawl using a s ...

Other materials:

Oil cooler
Exploded View 1. Radiator hose (upper) 2. Hose clamp 3. Radiator hose (lower) 4. Hose clamp 5. Water hose 6. Oil cooler 7. Connector bolt 8. Water hose 9. Oring A. To radiator (upper side) B. To radiator (lower side) 10. Relief valve Removal and Installation REMOVAL NOTE: When removing co ...

Consult function
APPLICATION ITEMS Diagnostic test mode Function Work Support This mode enables a technician to adjust some devices faster and more accurately. Self Diagnostic Results Retrieve DTC from ECU and display diagnostic items. Data Monitor Monitor the input ...

Categories


© 2017-2025 Copyright www.niveguide.com
0.0068