Nissan Versa (N17): Trunk lid lock

Nissan Versa 2nd generation (N17) Service Manual / Body exterior, doors, roof & vehicle security / Door & lock (DLK) / Trunk lid lock

TRUNK LID LOCK : Removal and Installation

REMOVAL

1. Remove trunk lid finisher (If equipped). Refer to INT "Removal and Installation".

2. Disengage rod holder (1) by lifting upward, and then separate trunk lid lock rod (3) from trunk lid lock assembly (2).

REMOVAL

3. Remove trunk lid lock assembly bolts.

4. Disconnect the harness connector and then remove trunk lid lock assembly (1).

REMOVAL

INSTALLATION

Installation is in the reverse order of removal.

CAUTION:

  • After installation, check trunk lid open/close, lock/unlock operation.

  • Check trunk lid lock assembly for poor lubrication. Apply a suitable multi-purpose grease to trunk lid lock if necessary.

INSTALLATION

Outside handle

OUTSIDE HANDLE : Removal and Installation REMOVAL 1. Fully close rear door glass. 2. Remove rear door finisher. Refer to INT "Removal and Installation". 3. Remove sealing screen. NOTE ...

Trunk lid opener handle

TRUNK LID OPENER HANDLE : Removal and Installation REMOVAL 1. Remove front kicking plate (LH). Refer to INT "KICKING PLATE INNER : Removal and Installation". 2. Release pawl using a sui ...

Other materials:

Hazard warning flasher switch
Push the switch on to warn other drivers when you must stop or park under emergency conditions. All turn signal lights flash. WARNING If stopping for an emergency, be sure to move the vehicle well off the road. Do not use the hazard warning flashers while moving on the highway unl ...

Warning function
WARNING FUNCTION : System Description OPERATION DESCRIPTION The warning function are as per the following items and are given to the user as warning information and warnings using combinations of Intelligent Key warning buzzer, combination meter buzzer, KEY warning lamp, shift P warning lamp ...

Categories


© 2017-2025 Copyright www.niveguide.com
0.007