Toyota
Nissan Versa
 Sedan Service Manual
Driver controls » Interior lighting system (INL) » System
Illumination control system

ILLUMINATION CONTROL SYSTEM : System Diagram

ILLUMINATION CONTROL SYSTEM : System

ILLUMINATION CONTROL SYSTEM : System Description

The illumination lamps operation is dependent upon the position of the combination switch (lighting and turn signal switch). When the combination switch (lighting and turn signal switch) is placed in the 1ST or 2ND position the BCM (body control module) receives input requesting the parking lamps to illuminate. This input is communicated to the IPDM E/R (intelligent power distribution module engine room) via the CAN communication lines. The CPU (central processing unit) of the IPDM E/R controls the tail lamp relay coil. When energized, this relay directs power to the parking and illumination lamps, which then illuminate.

BATTERY SAVER CONTROL

When the combination switch (lighting and turn signal switch) is in the 1st or 2nd position and the ignition switch is turned from ON or ACC to OFF, the battery saver control feature is activated. Under this condition, the illumination lamps remain illuminated for 10 minutes unless the combination switch (lighting and turn signal switch) position is changed. If the combination switch (lighting and turn signal switch) position is changed, then the illumination lamps are turned off after a 15 second delay. When the combination switch (lighting and turn signal switch) is turned from OFF to 1st or 2nd position after illumination lamps have been turned off by the battery saver control, the illumination lamps illuminate again.

DIAGNOSIS SYSTEM (BCM) (WITH INTELLIGENT KEY SYSTEM)

COMMON ITEM

COMMON ITEM : CONSULT Function (BCM - COMMON ITEM)

APPLICATION ITEM

CONSULT performs the following functions via CAN communication with BCM.

APPLICATION ITEM

SYSTEM APPLICATION

BCM can perform the following functions.

SYSTEM APPLICATION

DOOR LOCK

DOOR LOCK : CONSULT Function (BCM - DOOR LOCK)

DATA MONITOR

DATA MONITOR

ACTIVE TEST

ACTIVE TEST

WORK SUPPORT

WORK SUPPORT

*: Initial setting

INT LAMP

INT LAMP : CONSULT Function (BCM - INT LAMP)

DATA MONITOR

DATA MONITOR

ACTIVE TEST

ACTIVE TEST

WORK SUPPORT

WORK SUPPORT

*: Initial setting

INTELLIGENT KEY

INTELLIGENT KEY : CONSULT Function (BCM - INTELLIGENT KEY)

SELF DIAGNOSTIC RESULT

Refer to BCS "DTC Index".

DATA MONITOR

DATA MONITORDATA MONITOR

ACTIVE TEST

ACTIVE TEST

WORK SUPPORT

WORK SUPPORT

*: Initial Setting

BATTERY SAVER

BATTERY SAVER : CONSULT Function (BCM - BATTERY SAVER)

DATA MONITOR

DATA MONITOR

ACTIVE TEST

ACTIVE TEST

WORK SUPPORT

WORK SUPPORT

*: Initial setting

DIAGNOSIS SYSTEM (BCM) (WITHOUT INTELLIGENT KEY SYSTEM)

COMMON ITEM

COMMON ITEM : CONSULT Function (BCM - COMMON ITEM)

APPLICATION ITEM

CONSULT performs the following functions via CAN communication with BCM.

APPLICATION ITEM

SYSTEM APPLICATION

BCM can perform the following functions.

SYSTEM APPLICATION

DOOR LOCK

DOOR LOCK : CONSULT Function (BCM - DOOR LOCK)

DATA MONITOR

DATA MONITOR

ACTIVE TEST

ACTIVE TEST

WORK SUPPORT

WORK SUPPORT

* : Initial setting

INT LAMP

INT LAMP : CONSULT Function (BCM - INT LAMP)

DATA MONITOR

DATA MONITOR

ACTIVE TEST

ACTIVE TEST

WORK SUPPORT

WORK SUPPORT

* : Initial setting

BATTERY SAVER

BATTERY SAVER : CONSULT Function (BCM - BATTERY SAVER)

DATA MONITOR

DATA MONITOR

ACTIVE TEST

ACTIVE TEST

WORK SUPPORT

WORK SUPPORT

* : Initial setting

ECU DIAGNOSIS INFORMATION

BCM

List of ECU Reference

WITH INTELLIGENT KEY

ECU Reference
BCM BCS "Reference Value"
BCS "Fail-safe"
BCS "DTC Inspection Priority Chart"
BCS "DTC Index"

WITHOUT INTELLIGENT KEY

ECU Reference
BCM BCS "Reference Value"
BCS "Fail-safe"
BCS "DTC Inspection Priority Chart"
BCS "DTC Index"

WIRING DIAGRAM

INTERIOR ROOM LAMP CONTROL SYSTEM

Wiring Diagram

Wiring Diagram

Wiring Diagram

Wiring Diagram

Wiring Diagram

Wiring Diagram

Wiring Diagram

ILLUMINATION

Wiring Diagram

Wiring Diagram

Wiring Diagram

Wiring Diagram

Wiring Diagram

Wiring Diagram

Wiring Diagram

Wiring Diagram

Wiring Diagram

Wiring Diagram

BASIC INSPECTION

    More about «System»:

    Interior room lamp control system

    Illumination control system

    Nissan Versa Sedan Service Manual / Driver controls / Interior lighting system (INL) / System / Illumination control system

    Nissan Versa Sedan Service Manual

    Categories


    © 2017-2020 Copyright www.niveguide.com