Exploded View
1. Front bumper side bracket (RH) 2. Front bumper reinforcement 3. Front
bumper energy absorber
4. Front bumper fascia finisher (RH)
(If equipped)
5. Front bumper fascia 6. Fog lamp finisher (RH) (if
equipped)
7. Tow cover 8. License plate bracket 9. Under cover
10. Fog lamp finisher (LH) (if
equipped)
11. Front bumper fascia finisher (LH)
(if equipped) 12. Front bumper side bracket (LH) 13. Front spoiler A. Spring nut
B. Screw grommet
Pawl
Removal and Installation
REMOVAL
1. Remove air spoiler clips and air spoiler.
2. Remove under cover screws and clips.
3. Remove under cover.
INSTALLATION
Installation is in the reverse order of removal.
Exploded View 1. Front bumper side bracket (RH) 2. Front bumper reinforcement 3. Front bumper energy absorber 4. Front bumper fascia finisher (RH) (If equipped) 5. Front bumper fascia 6. Fog ...
Exploded View 1. Rear bumper side brackets (LH) 2. Rear bumper closing (LH) 3. Rear bumper fascia 4. Rear bumper closing (RH) 5. Rear bumper side brackets (RH) 6. Rear bumper reinforcement ...
U1000 Can comm circuit
Description
CAN (Controller Area Network) is a serial communication line for real-time
application. It is an on-vehicle multiplex
communication line with high data communication speed and excellent malfunction
detection ability.
Many electronic control units are equipped onto a vehicle, and ...
B1209 - B1210 Collision detection
Description
DTC B1209 - B1210 COLLISION DETECTION
The air bag diagnosis sensor unit will set this DTC if it has detected a
collision which has resulted in a frontal
or side deployment of one or more air bags or pre-tensioners. If this DTC is
detected after a SRS repair, the air
bag diagnosis ...