Nissan Versa (N17): Exterior (EXT)

Other materials:

Compression pressure
Inspection Warm up engine and then turn it off. Release fuel pressure. Remove ignition coil and spark plug from each cylinder. Connect engine tachometer (not required in use of CONSULT). Install compression gauge (B) with an adapter (A) (commercial service tool) onto spark plug hole. ...

A/T Fluid cooler
Cleaning Whenever the A/T is repaired, overhauled, or replaced, the A/T fluid cooler mounted in the radiator must be inspected and cleaned. Metal debris and friction material, if present, can become trapped in the A/T fluid cooler. This debris can contaminate the newly serviced A/T or, i ...