Nissan Versa (N17): Air breather hose

Nissan Versa 2nd generation (N17) Service Manual / Transmission & driveline / Transaxle & transmission (TM) / Air breather hose

Exploded View

Exploded View

1. Cap 2. Air breather hose 3. 2-way connector

Removal and Installation

REMOVAL

  1. Remove air cleaner case. Refer to EM, "Removal and Installation".
  2. Remove air breather hose from the 2-way connector.

    CAUTION: When removing air breather hose, be sure to hold 2-way connector securely.

  3.  Remove cap from air breather hose.

INSTALLATION

Installation is in the reverse order of removal.

CAUTION:

  • Install air breather hose. Do not bend hose tightly, which may result in pinching or clogging.
  • Insert the air breather hose to the base of the 2-way connector.

Control linkage

Exploded View 1. Shifter lever A 2. Selector lever 3. Selector cable 4. Shifter cable 5. Cable mounting bracket 6. Tapping bolt 7. Bracket 8. Grommet 9. M/T shift selector assembly 10. Shift s ...

5Th main gear assembly

Removal and Installation REMOVAL Move the shift selector to the 3rd gear position. Disconnect the shifter cable and the selector cable from shifter lever A and selector lever. Refer to TM, ...

Other materials:

Starting the engine (models with NISSAN Intelligent Key system)
1. Apply the parking brake. 2. Move the shift lever to P (Park) or N (Neutral). P (Park) is recommended. The starter is designed not to operate if the shift lever is in any of the driving positions. 3. Push the ignition switch to the ON position. Depress the brake pedal and push the ...

Calibration of G Sensor
Description TCM stores calibration data (inherent characteristic value) of G sensor to provide accurate control. Therefore, it is required to perform calibration of G sensor after the following work is performed. Removal/installation or replacement of G sensor Replacement of TCM Work ...

Categories


© 2017-2026 Copyright www.niveguide.com
0.0109