Nissan Versa (N17): Break-in schedule

Nissan Versa 2nd generation (N17) Owners Manual / Starting and driving / Break-in schedule

CAUTION

During the first 1,200 miles (2,000 km), follow these recommendations to obtain maximum engine performance and ensure the future reliability and economy of your new vehicle. Failure to follow these recommendations may result in shortened engine life and reduced engine performance.

  • Avoid driving for long periods at constant speed, either fast or slow, and do not run the engine over 4,000 rpm.
  • Do not accelerate at full throttle in any gear.
  • Avoid quick starts.
  • Avoid hard braking as much as possible.

Cruise control (if so equipped)

Fuel efficient driving tips

Follow these easy-to-use Fuel Efficient Driving Tips to help you achieve the most fuel economy from your vehicle. 1. Use Smooth Accelerator and Brake Pedal Application Avoid rapid starts and s ...

Other materials:

P073E Unable to engage r range
Description This malfunction is detected when the A/T does not shift into reverse position as instructed by TCM. This is not only caused by electrical malfunction (circuits open or shorted) but by mechanical malfunction such as control valve sticking, improper solenoid valve operation, etc D ...

Calibration of G Sensor
Description TCM stores calibration data (inherent characteristic value) of G sensor to provide accurate control. Therefore, it is required to perform calibration of G sensor after the following work is performed. Removal/installation or replacement of G sensor Replacement of TCM Work ...

Categories


© 2017-2026 Copyright www.niveguide.com
0.0067