Nissan Versa (N17): High-mounted stop lamp

Exploded View

Rear Spoiler

Rear Spoiler

1. Rear spoiler 2. High-mounted stop lamp assembly

Rear Parcel Shelf

Rear Parcel Shelf

1. Rear parcel shelf finisher 2. High-mounted stop lamp socket 3. High-mounted stop lamp bulb 4. High-mounted stop lamp housing Pawl

Removal and Installation

HIGH-MOUNTED STOP LAMP - REAR SPOILER

Removal

1. Remove the rear spoiler. Refer to EXT "Removal and Installation".

2. Remove screws and the high-mounted stop lamp.

Installation

Installation is in the reverse order of removal.

HIGH-MOUNTED STOP LAMP - PARCEL SHELF

Removal

1. Fully open trunk lid assembly.

2. Rotate the bulb socket counterclockwise.

3. Release high-mounted stop lamp pawls and remove high-mounted stop lamp housing.

Installation

Installation is in the reverse order of removal.

Bulb Replacement

WARNING: Do not touch bulb with your hand while it is on or right after being turned off. Burning may result.

CAUTION:

  • Do not touch the glass surface of the bulb with bare hands or allow oil or grease to get on it to prevent damage to the bulb.
  • Do not leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect the performance of lamp. When replacing bulb, be sure to replace it with new one.

HIGH-MOUNTED STOP LAMP BULB - REAR SPOILER

The high-mounted stop lamp bulb is a LED and is integrated into the high-mounted stop lamp and is serviced as an assembly. Refer to EXL "Removal and Installation".

HIGH-MOUNTED STOP LAMP BULB - PARCEL SHELF

Removal

1. Fully open trunk lid assembly.

2. Rotate the bulb socket counterclockwise and remove.

3. Remove the bulb from the bulb socket.

Installation

Installation is in the reverse order of removal.

Rear combination lamp

Exploded View 1. Rear combination lamp 2. Grommet Clip ...

License plate lamp

Exploded View 1. License plate lamp 2. License plate lamp bulb ...

Other materials:

A/T Control system
A/T Control system : component parts location 1. IPDM E/R 2. TCM 3. Transmission range switch 4. A/T unit 5. Output speed sensor 6. Stop lamp switch 7. A/T shift selector 8. Overdrive control switch 9. Combination meter (type B) A/T Control system : component description Name ...

U1000 Can comm circuit
Description CAN (Controller Area Network) is a serial communication line for real-time application. It is an on-vehicle multiplex communication line with high data communication speed and excellent malfunction detection ability. Many electronic control units are equipped onto a vehicle, and ...

Categories


© 2017-2025 Copyright www.niveguide.com
0.01