If your windshield is not clear after using the windshield-washer or if a wiper blade chatters when running, wax or other material may be on the blade or windshield.
Clean the outside of the windshield with a washer fluid or a mild detergent. Your windshield is clean if beads do not form when rinsing with clear water.
Clean each blade by wiping it with a cloth soaked in a washer fluid or a mild detergent. Then rinse the blades with clear water. If your windshield is still not clear after cleaning the blades and using the wiper, install new windshield wiper blades.
CAUTION
Worn windshield wiper blades can damage the windshield and impair driver vision.
Replace the wiper blades if they are worn.
1. Lift the wiper arm away from the windshield.
2. Push and hold the release tab A , and then move the wiper blade down B the wiper arm to remove.
3. Remove the wiper blade.
4. Insert the new wiper blade onto the wiper arm until it clicks into place.
CAUTION
Be careful not to let anything get into the washer nozzle D . This may cause clogging or improper windshield-washer operation. If something gets into the nozzle, remove it with a needle or small pin
WARNING Operating the engine with the air cleaner filter off can cause you or others to be burned. The air cleaner filter not only cleans the intake air, it also stops the flame if the e ...
If the brakes do not operate properly, have the brakes checked. It is recommended that you visit a NISSAN dealer for this service. Self-adjusting brakes Your vehicle is equipped with self-adjustin ...
Oil pan
Exploded View
1. Transaxle assembly 2. Oil pan gasket 3. Magnet
4. Oil pan 5. Overflow tube 6. Drain plug gasket
7. Drain plug 8. Oil pan fitting bolt
Removal and Installation
REMOVAL
Remove the drain plug and overflow tube, and then drain the CVT fluid.WARNING:
CVT fluid can splash ...
Trunk lid opener system
TRUNK LID OPENER SYSTEM : System Diagram
TRUNK LID OPENER SYSTEM : System Description
TRUNK LID OPEN OPERATION
When the trunk release button of the keyfob is pressed, the trunk
release signal transmits from the keyfob to
the BCM via the remote keyless entry receiver.
When the BCM re ...